數控車床自動回轉刀架設計-電氣含開題及7張CAD圖
數控車床自動回轉刀架設計-電氣含開題及7張CAD圖,數控車床,自動,回轉,刀架,設計,電氣,開題,cad
XXXXX學
XX設計（XX）
中期檢查報告
題目 數控車床自動回轉刀架設計
XXXXXXXXX院XXXXXXXXX專業XXXXX班
學生姓名 XXXX
學 號 XXXXXXX
指導教師 XXX
20XX 年 5 月 10日
自 檢 報 告
(要點:1.畢業設計(論文)工作任務的進展情況 2.未按計劃完成工作任務的原因 3.工作中所遇到的問題4.下一步工作打算)
:
1.畢業設計(論文)工作任務的進展情況
我的畢業設計題目是數控車床自動回轉刀架設計，現在畢業設計已經進行了10周左右，在老師的精心的指導下，我已經完成對刀架傳動系統、液壓缸的選擇計算；液壓傳動系統原理圖、零件圖、液壓缸部裝圖和部分機械總成圖的繪制；雖然在有些地方還達不到老師的要求，但是在剩下的時間里我會加快進度，爭取早日完成任務。
2.未按計劃完成工作任務的原因
在機械圖這部分，我還沒有達到老師所要求的進度。原因有幾個方面：關于數控車床的基礎知識還存在一些問題，液壓傳動系統的知識掌握的還不是很牢固；在查閱書籍這方面還有些不足，導致這一部分沒有達到進度。
3.工作中所遇到的問題
在畢業設計的幾周中，在自己的實際設計過程中，發現了許多問題：首先對軸上零件的固定方法掌握的不很全面，在卡具的設計過程中，對關于夾緊力大小的計算時，對于取安全系數不是很清楚，這些問題在老師的幫助下，我自己又查閱了一些資料，最后這些問題都得到了很好地解決；其次，在畫液壓傳動系統原理圖時，對液壓缸的內部結構不是十分了解；通過老師的進一步講解，我圓滿地解決了這一問題并加以應用。通過這一段時間的畢業設計，我感到自己所學的知識還有很大的不足。因此，我要在以后更加努力地學習，有不明白的時候，要把它徹底弄懂。
4.下一步工作打算
第十周 繪制控制系統程序流程圖
第十一周 控制系統硬件電路設計
第十二周 控制系統軟件編程
第十三周 程序調試
第十四周 撰寫15000字畢業設計論文
第十五周 打印輸出畢業設計資料，準備畢業答辯
學生簽字：
20XX年 5 月 10日
指導教師意見：
指導教師簽字：
年 月 日
教研室意見：
教研室主任簽字:
年 月 日
備注
4
附錄Ⅱ
Proceedings of the 7th ICFDM2006
International Conference on Frontiers of Design and Manufacturing
June 19-22, 2006, Guangzhou, China
Pages 255-260
A STUDY ON VIBRATION SIGNAL-BASED FEATURE EXTRACTION
FOR GRINDING SPINDLE-TYPED ROTOR-BEARING SYSTEM
DURING ACCELERATION
Jong-Kweon Park , Bong-Suk Kim , Soo-Hun Lee and Jun-Yeob Song
Intelligence and Precision Machinery Research Division, KIMM, 305 343, Rep. of Korea
School of Mechanical Engineering, Ajou University, 443 749, Rep. of Korea
Abstract: The goal of system monitoring is to minimize economic loss, to increase reliability, to maximize productivity, and to maintain product quality in manufacturing. Since vibration signals sufficiently contain the abundant
running information of the real system and the hidden fault symptoms, the feature extraction through those signals is widely applied for performance evaluation fault diagnostics of rotating machineries.
This paper shows feature extraction from vibration signals gathered in the grinding spindle-typed rotor-bearing system during acceleration in order to monitor an abnormal condition of current system like shaft crack by using various kinds of signal processing methods such as the Fast Fourier Transform, Short-Time Fourier Transform, Wigner-Ville Distribution, and Discrete Wavelet Transform. As well, the result of feature extraction in shaft crack condition was compared with that in normal condition.
Keywords: Feature extraction, Grinding spindle-typed rotor-bearing system, Non-stationary signal processing method, Accelerating process, Wavelet transform
1. Introduction
The condition monitoring or fault diagnosis in rotating machineries and machining process is a crucial requirement in order to maintain reliability, safety, and product quality and to prevent failures or damages .Compared with other machining methods, high- performance grinding process is one of the most complicated and important cutting processes as final machining stage; consequently, the monitoring of grinding process and machine is much more necessary in order to supervise the process and machine and also detect abnormalities . Among various kinds of approaches, vibration signal analysis method for feature extraction and nondestructive damage identification has been widely utilized due to capability to carry the abundant dynamic information and to indicate detailed motion of mechanical systems and to describe simultaneously when a fault occurs or what is its frequency . However, since most of the vibration signals sampled on mechanical systems are non-stationary or transient signals which sufficiently contain additional information or abnormal symptom, which can not be revealed from stationary signal, it is the key how to accurately draw dominant feature components from vibration signals because non-stationary signal is more complex than stationary signal. Up to date, for feature extraction of rotating machinery, many kinds of research results have mainly been focused on the stationary signal process; on the other hand, little research has been accomplished for the non-stationary signal process such as speed-up process; especially, there is almost no feature extraction using vibration signal of speed-up condition in the field of grinding process.
.This paper was about a study to extract the dominant features from vibration signals acquired in a laboratory grinding spindle-typed rotor-bearing system during acceleration by using several signal processing methods such as Time Domain Analysis (TDA), Frequency
Domain Analysis (FDA), and the Time-Frequency Analysis Method (TFAM). Modal testing, which detects dynamic characteristics of the system like natural frequency, was performed for the purpose of determining operating range for acceleration in test setup. Vibration data from the bearing housing passing through the distinctive resonance frequencies and frequency band in speed-up process were gathered through the experiments with normal and crack shaft condition. To get prominent signals of abnormality from acquired time data as a fundamental stage for diagnosis or monitoring technology, the Fast Fourier Transform (FFT), Short-Time Fourier Transform (STFT), Wigner-Ville distribution (WVD), and Wavelet Transform (WT) using commercial software were carried out and compared with each result
2. Theoretical Background
2.1. Review of Signal Analysis Methods
There are two major types of signal in the first natural division category: the stationary signal and non-stationary signal. Stationary signals are constant in their statistical parameters over time. Moreover, stationary signals are further divided into deterministic and random signals.
Random signals are unpredictable in their frequency content and their amplitude level, but they still have relatively uniform statistical characteristics over time.
On the other hand, non-stationary signals are divided into continuous and transient types. Transient signals are defined as signals which start and end at zero level and last a finite amount of time. In the stationary signal analyses, there are the RMS, Peak Value, Average/Distribution, and dynamic time models such as AR model and ARMA model in time
domain analysis as well as the Fourier Transform (FT) in frequency domain analysis. However, most signals of mechanical system like vibrations, noises, and sounds, generate non-stationary signals that data are intricate and irregular, so it is certainly necessary to use non-stationary signal processing methods to extract valid information from those signals. The FT is mainly used in frequency analysis of stationary signals, while frequency analysis
tends to accompany errors with regard to non-stationary signals. Since the frequency analysis simply shows only frequency components when non-stationary transient signals occur, it is difficult to find the time information. However, the TFAMs such as the STFT, WVD, and WT,
which perform frequency analysis at the time when failure occurs, compensate defects of time and frequency domain analysis, so that, it is considerably useful for applications to a number of fields.
2.2. Fast Fourier Transform
An infinite-range FT of a real-valued or a complex-valued record x(t) is defined by the complex-valued quantity.
（2.1）
Theoretically, as noted previously, this transform X(f) will not exist for an x(t) that is a representative member of a stationary random process when the infinite limits are used. However, by restricting the limits to a finite time interval of x(t), say in the range (0,T), then the finite-range the FT will exist, as defined by
（2.2）
Assume now that this x(t) is sampled at N equally t apart, where t has been spaced points a distance selected to produce a sufficiently high Nyquist frequency. As before, the sampling times are t=nt. However, it is convenient here to start with n=0 like Eq. (3). Let
（2.3）
Then, for arbitrary f, the discrete version of Eq. (2) is
（2.4）
The usual selection of discrete frequency values for the computation of X(f,T) is
（2.5）
At these frequencies, the transformed values give the Fourier components defined by
（2.6）
Where t has been included with X(f ) to have a scale kfactor of unity before the summation. Note that results are unique only out to k=N/2 since the Nyquist frequency occurs at this point. The function defined in Eq. (6) is often referred to as the Discrete Fourier Transform (DFT). A drawback in utilizing the DFT Eq. (6) for discrete signal processing is the time it takes to compute the transform values at all frequencies for large arrays of discrete data. More efficient numerical algorithms were developed to improve computational speed, and this has resulted in numerous the FFT algorithms.
2.3. Short-time Fourier Transform
The STFT is a Fourier Transform performed in successive time frames :
（2.7）
Where t is time, w is frequency, and h(u) is a temporal window function such as Rectangular, Gaussian, Blackman, Hanning, Hamming, etc. The STFT characterizes the temporal signal f(t) in both time and frequency domains. The main limitation of this TFAM is caused by the fixed temporal window applied, whose size (number of sampling points) defines the time and frequency resolutions; a large frame size improves the frequency resolution, while decreasing the time resolution and vice versa. Since fixed window is unable to adjust time and frequency resolution by signals, time-frequency resolution about non-stationary signals analysis needs to make mutual balance.
2.4. Wigner-ville Distribution
The WVD provides a relationship between time and frequency during the period of the time data window that is not present in standard Fourier Spectral Analysis. It is capable of displaying any phase and magnitude changes presented. The WVD can be defined in both the time and frequency domains. Due to computational efficiency and good time resolution, the time domain definition is used. The definition of the WVD is
（2.8）
Where x(t) is the time signal, conjugate, t is the time domain variable, and frequency. Any real signal x(t) is not only contaminated by the noise, but also by the interference terms. Suppression of both of these requires a combination of time and frequency windowing with the WVD. This approach is called the Smoothed Pseudo-Wigner-Ville Distribution (SPWVD), and expressed as follows:
（2.9）
In this Eq. (9), two independent windows exist. The function W() is a result of the application of a truncating window to the original time data, and determines the frequency resolution of the WVD. The g(t) is a smoothing window, which determine the times resolution. The independence of the two window functions enables them to be applied individually, or in combination, so that the desired degree of interference suppression can be achieved. Discrete smoothed version of the SPWVD can be expressed as
（2.10）
Where the n and m denote the time and frequency indices, respectively, and S is analytic signal obtained form Hilbert transform of the original windowed signal. N is the half-size of the FFT window w(k) and Q is the half-size of the post smoothing window g(p). The SPWVD is achieved by convolving the WVD with smoothing window.
2.5. Wavelet Transform
The WT, a popular tool for studying intermittent and localized phenomena in various signals, is efficient signal processing method to obtain time information lost in the FT, partly irregular fluctuation, time change changing, and discontinuous point. Due to the multi-resolution ability of the WT, the noised signals can be separated into several approximation signals and detail signals. The WT of a signal f(t) is defined as the sum of all of the time of the signal f(t) multiplied by a scaled and shifted version of the wavelet function (t). The coefficients C(a,b) of the WT of the signal f(t) can be expressed as follows
（2.11）
Where a and b are the scaling and shifting parameters in the WT. Basically, a small scaling parameter corresponds to a compressed wavelet function. As a result, the rapidly changing features in the signal f(t), i.e. high frequency components, can be obtained from the WT by using a small scaling parameter. On the other hand, the low frequency features in the signal f(t) can be extracted by using a large scaling parameter with a stretched wavelet function. For the sampled signal, a digital signal, f(k), k=0, 1, 2, !-, the Discrete Wavelet Transform (DWT) should be considered. The most commonly used DWT is the scaling and shifting of parameters with powers of two. That is:
（2.12）
（2.13）
Where j is the number of levels in the DWT. The coefficients C(a,b) of the DWT can be divided into two parts: that is, one is the approximation coefficients and the other is the detailed coefficients. The approximation coefficients are the high scale and the low frequency components of the signal f(t), while the detail coefficients are the low scale and the high frequency components of the signal f(t). The approximation of the DWT for the sampled signal f(t) at Coefficients level j can be expressed as Eq. (14).
（2.14）
Where (n) is the scaling function associated with j,k (n). Similarly, the detail the wavelet function coefficients (D) of the DWT for the sampled signal f(t) at level j can be expressed as follows.
英文翻譯中文
提取磨削主軸型轉子軸承系統在加速度期間振動信號的特征研究
摘要:
目標監控系統，是為了最大限度地減少經濟損失, 以增加可靠性, 最大限度地提高工作效率，從而保持制造業產品質量。由于振動信號含有真實系統和故障患癥狀的相當豐富的運動信息的，因此這些信號被廣泛應用于評價故障診斷旋轉機械。本文主要講述提取聚集在磨削轉子系統加速度振動信號并監測異常的情況，目前可以利用各種方法對信號進行處理，如軸斷裂的處理方法有傅立葉變換、短時傅里葉變換、魏格納分布,以及離散小波變換，同時將常狀態與軸斷裂提取情況特征相比。
關鍵詞:
特征提取 磨梭型轉子系統 非平穩信號處理的方法 加速進程 小波變換
1簡介
狀態監測和故障診斷在旋轉機械的加工過程中是一個重要要求，其目的為了保持可靠性和安全性，以及產品質量，防止故障或損壞。與其他加工方法相比，高性能研磨過程是切削過程最復雜和最重要的最后加工階段；因此，磨削加工工藝及設備，更需要利用監督過程發現機器異常。在各種方式中由于有能力進行豐富的動態查詢，并進行詳細的分析，機械系統在什么頻率發生故障，振動信號分析方法的特征提取和無損鑒定已被廣泛使用，不過，由于大部份的振動信號為非靜態或暫態信號中含有大量的干擾或異常的癥狀，這些并不能顯示平穩信號，它的關鍵是如何準確地繪制振動信號的主成分，因?yàn)榉瞧椒€(wěn)信號較平穩的信號更復雜。截至目前為止，對于旋轉機械特征提取，多種研究成果主要集中在平穩信號的研究過程。在另一方面，對加速進程非平穩信號研究卻很少， 因此幾乎沒有任何研磨過程加速狀態領域的振動信號特征提取。
本文是關于研究從動態信號中提煉的有用信號，利用一個實驗室紡錘型轉子系統在加速狀態下振動，用幾個信號處理方法如時間域分析(tda)和頻域分析(FDA)、時間-頻率分析法(tfam)測試模型，從而展現其中的動態系統的特性，在正常及裂紋軸條件下振動數據從軸承箱通過獨特的共振頻率和頻段混合。取得異常段時間數據作為一個階段的診斷或監測技術，用(快速傅立葉變換),短時傅里葉(Fourier),魏格納分布(WVD), 和小波變換(WT)用商業軟件進行比較每個結果。
2理論背景
2.1回顧信號分析方法
第一部自然分法中主要有兩種類型的信號: 穩態信號和非平穩信號。 穩態信號在整個過程中是不變的。此外，穩態信號又進一步分為確定性信號和隨機信號，隨機信號是意想不到的頻率內容及其振幅的大小，但他們?nèi)匀挥邢鄬?duì)統一的統計特征隨著時間變化。
在另一方面，非穩態信號分為連續型和瞬態型。暫態信號是指信號的開始和結束時為零級，只是持續在一定的時間內的信號。
對靜態的信號分析量有有效值，峰值，平均值與動態的時間模式，如AR模型和ARMA模型在時間域分析以及傅立葉變換的頻域分析。然而，大多數信號的機械系統，如振動、噪音和聲音都生非平穩信號，數據是錯綜復雜和不規則的，因此絕對有必要使用非平穩信號處理方法，從這些信號提取有效信息。傅立葉變換主要用于穩態信號頻率分析，雖然對非穩態信號頻率分析往往伴隨著錯誤,既然率分析只是傾向于頻率元件非穩態信號發生時間，其中很難找到時間相關信息。不過，時域分析如短時短時傅立葉分析、魏格納分布、和小波分析其中推演出失效時頻率分析，從而彌補缺陷，這是一個在很多領域都相當有用的方法。
2.2傅立葉變換
一個實值或復值函數的無窮傅立葉變換由x(t)得到
（2.1）
理論上,如前所述, 這個變換X(f)將不會存在,對于一個X(t)這是一個典型無限極限應用在固頂過程的例子。不過這里限制了極限一個有限的時間間隔的x(t)即(0,t), 然后在有限范圍內的傅立葉變換是永遠存在的，正如下面公式所示:
（2.2）
現在假定x(t)在同一個t時刻采樣,這里t間隔被用于產生足夠高的奈奎斯特頻率。一如以往，采樣時間為t=nt。 然而,在這里以N=0開始很方便，象公式(2.3)。讓
（2.3）
那么，對任意f，公式（2.2）的離散表達為：
（2.4）
通常選擇的離散頻率值計算x(f,t)
（2.5）
在這些頻率中，轉化的傅里葉成分?jǐn)?shù)值有以下公式定義：
（2.6）
這里t已被包含在X(f)中從而在統一之前成為一個規模因子?？吹降慕Y(jié)果是獨一無二的,只有當在K=n/2這一點奈奎斯特頻率才發生。在公式2.6中定義的函數，往往被稱為離散傅立葉變換(DFT)。
利用傅立葉變換公式(2.6)的缺點為處理離散信號所花費的大量的時間，計算的價值轉化所有頻率離散數據。更有效的數值算法由此產生，分別制定了改進的計算速度,而這已經導致了大量的傅立葉算法。
2.3短時傅里葉變換
傅立葉短時變換是在連續的時間進行傅立葉變換
（2.7）
這里t是時間w是頻率h(u)是窗口功能函數，如矩形、高斯、布拉克曼、漢寧等，
短時特征時間信號f(t)在時間和頻率范圍內。主要限制短時傅立葉變換的是固定時間窗，其大小(多少個采樣點)確定的時間和頻率決定；大窗提高頻率分辨率，同時減少了時間分辨率，反之亦然。由于固定窗口是無法調整的時間和頻率分辨率的信號為適應分析非平穩信號，時間和頻率分辨率需要彼此的平衡。
2.4魏格納分布
魏格納分布提供了實時數據窗口而不是標準的傅立葉譜分析時間和頻率的關系, 它能夠展示任何相位和幅度的變化。該魏格納分布可以定義在時間和頻率范圍。由于計算效率和及時解決，這種方法被采用。魏格納分布的定義式：
（2.8）
這里X(t)是時間信號X* (t)是他的復頻率T是時間域變量w是頻率任何真正的信號x(t) 不僅受到噪音干擾，而且也受到外界系統的干擾。去掉這兩方面干擾需要利用魏格納分布結合時間和頻率這樣計算x(f,t)的方法是所謂的平滑魏格納分布并表示如下:
（2.9）
在這一公式(2.9)中，存在兩個獨立的窗口。函數w(w)是由于采用了漢寧窗口原有的實時數據，并決定了頻率分辨率的魏格納分布。G(T)是平滑的窗口，它決定著時間的定義。 獨立的兩個窗口功能，使他們能夠應用單獨或合并因此，理想的程度的抑制干擾才能實現。離散魏格納分布的觀測可表達為：
（2.10）
這里N和M分別表示的是時間和頻率指數，s是從希爾伯特變換獲得的解析信號，N是傅立葉窗的一半w（k）和Q是平滑窗g（p）的一半平滑魏格納分布由通過濾波窗口魏格納分布得到。
2.5小波變換
小波變換是一個學習各種信號的間歇和局部現象受歡迎的工具，是有效的獲得傅立葉變換中丟失時間信息的信號處理方法，包括部分不規則的波動，隨著時間變化的變化， 以及間斷點。由于多分辨能力的小波變換，噪聲信號可分成幾個逼近信號和細節信號。 小波的一個信號f(t)的定義為所有的時間信號f(t)乘以一個規模和轉換的小波函數。t 系數c(a,b)。小波變的信號f(t)可表達如下：
（2.11）
A和B屬于小波變換中的比例變換因子?；旧?，一個小規模的參數對應著一個小波壓縮功能。因此迅速變化的信號f(t)，即高頻成分，可從小波變換用小比例參數獲得。 在另一方面，低頻信號f(t)可以提取采用大尺度參數與比例因子由小波函數獲得。
為采集信號，采用數字信號，f(k),k=0,1,2! ---，應該考慮離散小波變換。最常用離散小波變換是將比例變換因子定位2的冪，即:
（2.12）
（2.13）
其中j是離散小波變換的級別。系數c(a,b)可分為兩部分。即: 一是逼近系數，另一種是詳盡的系數。逼近系數是高幅值和低頻成分的信號f(t)，詳盡系數是低幅值高頻率的部分，離散小波變換的逼近系數Aj可以定義為
（2.14）
Q(N)為與小波函數相關的比例縮放函數。同樣，抽樣信號f ( t )的離散小波變換的詳盡系數(d)在j級可表述如下：
15
收藏