喜歡這個資料需要的話就充值下載吧。。。資源目錄里展示的全都有預覽可以查看的噢，，下載就有,,請放心下載，原稿可自行編輯修改=【QQ：11970985 可咨詢交流】====================喜歡就充值下載吧。。。資源目錄里展示的全都有，，下載后全都有,,請放心下載，原稿可自行編輯修改=【QQ：197216396 可咨詢交流】====================
摘 要 由于各種因素的影響，市場上玻璃清潔機器人的技術還處于初級階段，在實際運 用中還存在諸多問題。本次設計通過研究玻璃清潔機器人的工作原理及過程，經過詳 細的方案規劃，反復論證方案，找出一種目前技術上最成熟、最符合實際運用的運動 方案。 本設計介紹了解決目前玻璃幕墻難于清洗這一難題的玻璃清潔機器人的研究,設計,運 用方案,并把其中一種我們認為是目前最合理,最具有市場前景的設計方案進行詳細規 劃及分析,反復對方案進行認證,逐步進行修改及優化.確定玻璃清潔機器人以輪式自主 移動機器人為載體.最終完成玻璃清潔機器人的結構設計、機構各種參數計算和分析、 相關零件材料的選用及工藝分析。 從玻璃清潔機器人在玻璃墻壁上的行走機構,轉向和自動避障機構,自動清洗機構 三個模塊詳細闡述了機器人系統的工作原理和實現方法.玻璃清潔機器人的工作原理是 利用兩對傳動齒輪將驅動電機上的力矩傳遞到驅動軸上,從而帶動兩個后輪轉動,實現 機器人在玻璃墻壁上的自由行走.機器人的兩個前輪均采用嵌入式直接驅動裝置,在機 器人正常直線行走時為機器人提供一定的牽引力,在機器人遇到障礙物時則一個電機正 轉,一個電機反轉,實現機器人的零轉彎半徑轉向.清洗機構為滾桶式,由驅動電機提供 動力,并且中間無減速機構,即滾筒的轉速與驅動電機的轉速相同。 通過在已有的方案基礎上進行創新設計，使得設計出來的玻璃清潔機器人更能滿 足用戶的需求，以此拓展它的市場前景。 關鍵詞：輪式；玻璃；滾筒；嵌入式直接驅動裝置；正反轉 Abstract Because of the influence of various factors, glass cleaning robot technology is still in its infancy in the market, there are lots of problems in practice. This design through the study of working principle and process of glass cleaning robot, through the detailed program planning, repeated demonstration project, to find out a kind of the most mature on the technology at present, the most practical use of motion scheme. Researching, designing, using the scheme of glass cleaning robot to solve the glass curtain wall is difficult to clean are introduced in this paper，and the one we think is the most reasonable, most has the market prospect of detailed planning and analysis has been made to the design, repeated authentication scheme, modify and optimize step by step. Finally determine the glass cleaning robots with wheeled autonomous mobile robot as the carrier, and finishing glass cleaning robot structure design, calculation and analysis of various parameters, material selection of parts and process analysis. This article from the travel mechanism of glass in glass wall cleaning robot, steering and automatic obstacle avoidance mechanism，automatic cleaning mechanism three modules in detail elaborated the working principle and realization method of the robot system. Glass cleaning robots working principle is to use two pairs of gear drives the torque on the machine, is passed on to the drive shaft to drive the two rear wheels turning, to realize robot walking on the glass wall of freedom. The robots two front wheels adopts embedded direct drive device, in the robot walking straight and normal provide certain traction force for robot, in the robot meet with obstacles is a motor forward, a motor reversal, realize zero turning radius turn of the robot. Cleaning mechanism is barrel type, provided by the drive motor power, and the middle without retarding mechanism, namely the rattler at the same speed with the speed of the drive motor. Through innovative designing based on the existing solutions, makes the designed glass cleaning robot can meet the needs of users, to expand its market prospects. Key words: wheel；glass；rattler；embedded direct drive device；pros and cons go 目 錄 1 引言 ........................................................1 1.1 課題研究的背景 ........................................................1 1.2 課題研究的意義 ........................................................2 1.3 玻璃清潔機器人的發展?fàn)顩r和目前具有的技術水平 ..........................2 2 玻璃清潔機器人總體運動方案規劃 ..............................2 2.1 玻璃清潔機器人行走、轉向機構方案設計 ..................................2 2.1.1 足式行走機構.........................................................3 2.1.2 履帶式行走機構.......................................................4 2.1.3 輪式行走、轉向機構...................................................4 2.2 清洗機構 ..............................................................7 2.3 傳動機構 ..............................................................8 2.3.1 方案一...............................................................8 2.3.2 方案二...............................................................8 2.4 最終選用的總體方案 ....................................................8 3 電機選型 ....................................................9 4 玻璃清潔機器人結構設計和主要參數計算、分析 .................12 4.1 車輪設計 .............................................................12 4.2 后輪驅動減速機構設計 .................................................13 4.3 后輪驅動軸的結構設計與校核 ...........................................18 4.4 齒輪的定位結構設計 ...................................................20 4.5 中間軸的結構設計與校核 ...............................................21 4.6 電機連接軸的結構設計 .................................................24 4.7 后輪減速機構箱體結構設計 .............................................25 4.8 底盤結構設計 .........................................................26 4.9 螺栓組連接的結構設計 .................................................28 4.10 吸附機構的結構設計及合理性分析 ......................................29 5 玻璃清潔機器人穩定性分析 ...................................30 6 重要零件的材料選用和加工工藝的編寫 .........................31 6.1 軸類零件的材料選用與加工工藝分析 .....................................31 6.2 底盤的熱處理與加工工藝分析 ...........................................37 6.3 減速機構上箱體和機器人外蓋的加工藝分析 ...............................38 6.4 齒輪的加工工藝分析 ...................................................39 6.5 磁吸盤的加工工藝分析 .................................................39 7 裝配干涉分析結果 ...........................................39 8 玻璃清潔機器人總裝配圖 .....................................40 9 結論 .......................................................41 謝 辭 ........................................................42 參考文獻 ......................................................43 附 錄 ........................................................44