噴涂機器人設計—機身系統設計

噴涂機器人設計—機身系統設計,噴涂機器人設計—機身系統設計,噴涂,機器人,設計,機身,系統 南 京 理 工 大 學 畢業設計說明書(論文) 作 者: 王一峰 學 號： 060104240 學院(系): 機械工程學院 專 業: 機械工程及自動化 題 目: 噴涂機器人設計 —機身系統設計 副教授 郭鋼 指導者： (姓 名) (專業技術職務) 胡小秋 副教授 評閱者： (姓 名) (專業技術職務) 2010年 6 月 畢業設計說明書（論文）中文摘要 本文主要介紹的是一種噴涂機器人的總體方案論證與機身系統的設計。首先根據技術要求，確定機器人的結構型式為關節型，驅動方式選擇步進電機驅動，由工作空間計算出大、小臂尺寸，控制方式為開環連續軌跡控制，手把手示教。其次設計了噴涂機器人的機身系統，設計過程中先選擇了步進電機的型號，然后確定傳動方式選擇齒輪傳動帶動腰部轉動，其中齒輪傳動為二級圓柱直齒輪減速傳動，并對傳動系統中齒輪、軸、軸承進行了設計與校核。 關鍵詞 噴涂機器人 機身系統 齒輪傳動 步進電機 畢業設計說明書（論文）外文摘要 Title Design of a spray painting robot ——Design of the fuselage system Abstract This paper is an overall introduction in conceptual design and study of painting robot, which demonstrates the design of system in certain robot. Firstly under the technical requirements, choose the structure of the robot as articulated robot, stepper motor as driver. Arm size is decided by calculating the working space. Control mode is open-loop control method for the continuous trajectory control, hands-teaching. This is followed by the design of the painting robot systems. In the design process, first the model of the stepper motor is selected, and then the driving mode is determined that is back rotation is driven by transmission gear. Toothed gearing is double-geared spur gear reduced drive. Gear, shaft, bearings in the transmission system is designed and checked. Keywords coating robot Fuselage system Gear-driven stepper motor