變速箱蓋機械加工工藝設計及其數控加工編程【鉆M14螺紋底孔夾具】

喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有，，請放心下載，，文件全都包含在內，圖紙為CAD格式可編輯，【有疑問咨詢QQ:414951605 或 1304139763】 廣西大學本科畢業設計 變速箱蓋機械加工工藝設計 及其數控加工編程 年 級： 2003級 畢 業 生：陸玉林 指 導 教 師：段明揚 陳遠玲 學 科 專 業：機械工程及其自動化 廣 西 大 學 機 械 工 程 學 院 二OO七年六月 廣西大學機械工程學院機械工程及自動化專業 機械加工工藝卡片 工序名稱 粗銑半精銑M面、鉆4-的孔 工序號 Ⅰ 零件名稱 變速箱蓋 零件號 1 零件重量 同時加工工件數 1 材料 毛坯 牌號 硬度 型式 重量 HT15～32 150HBS 金屬型鑄件 設備 夾具 輔助工具 名稱 型號 專用夾具 立式銑削加工加工中心 YCM-V85A 安裝 工步 安裝及工步說明 刀具 量具 走刀長度mm 走刀次數 切削深度mm 進給量mm/r 主軸轉速r/min 切削速度m/min 基本工時min 1 粗銑M面 高速鋼端面銑刀 190 1 3 0.20 1338 109 0.3 2 半精銑M面 高速鋼端面銑刀 190 1 1 0.24 1500 119 0.5 3 鉆孔 標準麻花鉆 25 1x4 25 0.25 1107 80 1.6 4 粗鉸孔孔 mm鉸刀 25 1 x2 25 0.97 178 14 0.6 設計者 陸玉林 指導老師 段 明 揚 陳 遠 玲 共 5頁 第1頁 廣西大學機械工程學院機械工程及自動化專業 機械加工工藝卡片 工序名稱 鉆1、2號斜螺紋底孔，攻螺紋，锪螺紋孔端面，螺紋孔倒角 工序號 II 零件名稱 變速箱蓋 零件號 1 零件重量 同時加工工件數 1 材料 毛坯 牌號 硬度 型式 重量 HT15～32 150HBS 金屬型鑄件 設備 夾具 輔助工具 名稱 型號 專用夾具 立式鉆床 Z525 安裝 工步 安裝及工步說明 刀具 量具 走刀長度mm 走刀次數 切削深度mm 進給量mm/r 主軸轉速r/min 切削速度m/min 基本工時min 1 銑端面 高速鋼端面銑刀 1x2 0.5 0.5 1388 109 0.04 2 鉆的孔 標準麻花鉆 1x2 35 0.65 1107 80 0.78 3 鉆的孔 標準麻花鉆 1x2 35 0.48 392 80 0.78 4 攻螺紋 絲錐 1x2 25 1.25 272 75 0.26 5 倒角 90°锪鉆 1x2 1 手動 163 14 0.08 設計者 陸玉林 指導老師 段 明 揚 陳 遠 玲 共 5頁 第2頁 廣西大學機械工程學院機械工程及自動化專業 機械加工工藝卡片 工序名稱 鉆3號螺紋底孔，攻螺紋，锪螺紋孔端面，锪螺紋孔倒角 工序號 III 零件名稱 變速箱蓋 零件號 零件重量 同時加工工件數 1 材料 毛坯 牌號 硬度 型式 重量 HT15～32 150HBS 金屬型鑄件 設備 夾具 輔助工具 名稱 型號 專用夾具 立式鉆床 Z525 安裝 工步 安裝及工步說明 刀具 量具 走刀長度mm 走刀次數 切削深度mm 進給量mm/r 主軸轉速r/min 切削速度m/min 基本工時min 1 銑端面 高速鋼端面銑刀 1 0.5 0.5 1388 109 0.02 2 鉆的孔 標準麻花鉆 1 30 0.65 1107 80 0.39 3 鉆的孔 標準麻花鉆 1 30 0.48 392 80 0.39 4 攻螺紋 絲錐 1 30 1.25 272 75 0.13 5 倒角 90°锪鉆 1 1 手動 163 14 0.04 設計者 陸玉林 指導老師 段 明 揚 陳 遠 玲 共 5頁 第3頁 廣西大學機械工程學院機械工程及自動化專業 機械加工工藝卡片 工序名稱 鉆4號螺紋底孔，攻螺紋，锪螺紋孔端面，锪螺紋孔倒角 工序號 IV 零件名稱 變速箱蓋 零件號 零件重量 同時加工工件數 1 材料 毛坯 牌號 硬度 型式 重量 HT15～32 150HBS 金屬型鑄件 設備 夾具 輔助工具 名稱 型號 專用夾具 立式鉆床 Z525 安裝 工步 安裝及工步說明 刀具 量具 走刀長度mm 走刀次數 切削深度mm 進給量mm/r 主軸轉速r/min 切削速度m/min 基本工時min 1 銑端面 高速鋼端面銑刀 1 0.5 0.5 1388 109 0.02 2 鉆的孔 標準麻花鉆 1 30 0.65 1107 80 0.39 3 鉆的孔 標準麻花鉆 1 30 0.48 392 80 0.39 4 攻螺紋 絲錐 1 30 1.25 272 75 0.13 5 倒角 90°锪鉆 1 1 手動 163 14 0.04 設計者 陸玉林 指導老師 段 明 揚 陳 遠 玲 共 5頁 第4頁 廣西大學機械工程學院機械工程及自動化專業 機械加工工藝卡片 工序名稱 銑4-孔凹臺 工序號 V 零件名稱 變速箱蓋 零件號 1 零件重量 同時加工工件數 1 材料 毛坯 牌號 硬度 型式 重量 HT15～32 150HBS 金屬型鑄件 設備 夾具 輔助工具 名稱 型號 普通夾具 立式鉆床 Z525 安裝 工步 安裝及工步說明 刀具 量具 走刀長度mm 走刀次數 切削深度mm 進給量mm/r 主軸轉速r/min 切削速度m/min 基本工時min 1 锪鉆平面 锪鉆 1x4 0.5 0.5 1388 109 0.052 設計者 陸玉林 指導老師 段 明 揚 陳 遠 玲 共 5頁 第5頁 機械加工工序過程卡片 廣西大學機械工程學院機械工程及自動化專業 機械加工工藝過程卡片 零件號 零件名稱 變速箱蓋 工序號 工序名稱 設 備 夾 具 刀 具 量 具 工時min 名稱 型號 名稱 名稱 規格 名稱 規格 I 銑M面，鉆4-孔，粗鉸兩個定位孔 立式銑削加工加工中心 YCM-V85A 專用夾具1號 鑲齒圓柱面銑刀、麻花鉆、鉸刀 銑刀160 mm、鉆頭45 mm等 游標卡尺 II 銑1、2號端面，鉆1、2號斜螺紋底孔，攻螺紋，螺紋孔倒角 立式鉆床 Z525 專用夾具2號 標準麻花鉆、絲錐、锪鉆 游標卡尺 III 銑3號端面，鉆3號螺紋底孔，攻螺紋，锪螺紋孔倒角 立式鉆床 Z525 專用夾具3號 標準麻花鉆、絲錐、锪鉆 游標卡尺 IV 銑4號端面，鉆4號螺紋底孔，攻螺紋，锪螺紋孔倒角 立式鉆床 Z525 專用夾具3號 標準麻花鉆、絲錐、锪鉆 V 锪鉆4-14孔平面 立式鉆床 Z525 專用夾具4號 锪鉆 游標卡尺 圓柱塞規 去毛刺和銳棱 鉗工臺 VI 終檢 1 變速箱蓋機械加工工藝設計及其數控加工編程 摘要 本設計研究的零件是變速箱蓋。其加工工藝的可行性、合理性、先進性將直接影響零件的質量、生產成本、使用性能和壽命。數控加工技術集傳統的機械制造、計算機技術、現代控制技術、傳感檢測技術、信息處理和光機電技術于一體，是現代機械制造技術的基礎。數控加工技術的廣泛應用，給機械制造業的生產方式和產品結構帶來了巨大的變化。數控加工是用數字化信號對機床運動及其加工過程進行控制的一種方法。數控加工技術包含了數控加工與編程、金屬加工工藝、CAD／CAM軟件操作等多方面知識與經驗，其主要任務是計算加工走刀中的刀位點(簡稱CL點)。隨著數控技術的飛速發展，數控技術的水平和普及程度已經成為衡量一個國家綜合國力和工業現代化水平的重要標志。本設計是對變速箱蓋進行機械加工工藝設計和數控加工編程，首先是設計好加工工藝規程，選擇好刀具、主軸轉速和實際切削速度等各種因素，然后根據已經選擇的刀具、主軸轉速和實際切削速度等在Cimatron軟件中設置相應的參數進行模擬加工，其具體內容如下： 1、 通過繪制零件工程圖和三維造型圖更深一步了解零件的具體形狀； 2、 根據設計零件的質量要求和技術要求設計了零件的加工工藝規程，選擇了合理的定位基準，并填寫了工序卡片上的相關內容； 3、 設計一道工序的夾具圖，并繪制夾具主要零件圖和裝配圖； 4、 在Cimatron軟件對工件進行了數控模擬加工，并且進行了仿真校驗。最后還對零件的數控加工進行后置處理，生成了零件加工的G代碼。 關鍵詞：機械加工工藝設計 夾具設計 數控加工 Mechanical machining design of the lid of Speed change box and its numerical control processing programming Summary The design is about the lid of Speed change box. The reasonableness, advanced components of its machining process , will directly affect the quality, production costs, the use of performance and longevity. Numerical control processing technology gets the traditional machinery manufacturing, computer technology, modern control technology, sensor testing technology, information processing and optical technology together，it is the foundation of modern machinery manufacturing technology. The widespread application of numerical control processing technology has brought about tremendous changes to production methods and product structure of the machinery manufacturing. numerical control processing is a method that uses numerical information to control the movement and processing of machine tools. numerical control processing technology incorporates numerical control processing and programming, metal machining, CAD/CAM operation sofeware, and other aspects of knowledge and experience, its main task is to calculate the tool points (short for the CL points) of the tool spaces during processing. With the rapid development of numerical control technology, its level and popularization has become an important symbol which is a measure of a country's comprehensive national strength and industrial modernization level. This design is to design mechanical machining and numerical control processing programming for the lid of Speed change box, The first is to design a machining, select cuttersand the rotational speed of main axis and the actual cutting speed, and so on, and then base on the chose cutters, the rotational speed of main axis and the actual cutting speed, and so on, install in the corresponding parameters ,simulate processing with Cimatron software, Its specific contents are as follows : 1. I further understood the concrete shape of the components by drawing engineering plat and three dimensional modeling chart of this components. 2. The machining of part has been designed according to the quality requirement and technical design component and a reasonable benchmark positioning also has been chosen , and then complete the processes of the relevant cards. 3. I designed a jig chart of a working procedure, and drew up the main detail drawing and the assembly drawing of the jig. 4. A numerical control simulation processing has been done in Cimatron software.Finally processing the numerical control processing of the part and the . G code generated. Keywords:Mechanical machining design, Jig design, Numerical control processing 用普通刀具在立體平版印刷格 式中對三角雕塑面的數控加工 一個產生數字控制刀具路徑的統一方法已經出現，這個刀具路徑是用普通刀具在立體平版印刷格式中對三角形雕塑表面的數字控制加工產生的。這個方法的產生很重要，這是是因?yàn)橐粋€(gè)立體平板印刷格式的應用象征著一個計算機輔助設計模型已經在很短的一段時間內被工業界廣泛接受。這不僅是因?yàn)楸热缣貏e需要運用這種方法的快速設計模型的應用，而且還歸結于現在可以直接用數字化和反向工程過程來制造復雜的立體平板印刷模型。雖然有很多支持立體平板印刷文件的計算機輔助設計和計算機輔助制造的軟件系統，但在這些文章中只有幾頁紙直接涉及到從立體平板印刷文件來的數字控制加工問題。一種用普通自動編程切削刀具產生刀具路徑的一般計算算法已經出現。這種算法看起來普遍，它可適用于包括球頭刀、平底刀和內圓角精銑刀在內的各種各樣的切削刀具。為了減少計算時間，一個用彩色小石塊鑲嵌產生網狀詢問區域高的效方法也已經產生。用模仿加工和真正的機械加工制造的實例來說明所提出的方法的效率。 1、介紹 目前，多數計算機輔助設計(CAD) 系統利用參數表面代表CAD 模型的幾何形狀。由于各種各樣的設計或制造過程的不同，需要轉換不同的計算機輔助設計系統（CAD）和計算機輔助制造系統（CAM）之間的模型。中立數據文件譬如最初的圖表交換規格(IGES) 廣泛地被用于(美國產品數據協會1996) 。最初的圖表交換規格(IGES)描述在建立CAD 模型時可能被使用的信息、定義個體模型時的參數量和各個個體之間不同的關系。但是，使用最初的圖表交換規格(IGES)翻譯CAD 模型并不是總是容易的，這是因?yàn)榇蠖鄶?shù)計算機輔助設計系統（CAD）使用不同的內部表示方法而且轉換并不是總是直接的而錯誤又比較多。與最初的圖表交換規格(IGES) 相比，立體平版印刷(STL) 格式比較簡單，并且它的實施比較容易 (Jacobs 和Reid 1992 年, Kochan 1993) ?；旧?，一個立體平版印刷(STL)文件只包含一個三角形和它們的法線傳播媒介。立體平版印刷(STL)文件不能替換最初的圖表交換規格(IGES)，最初的圖表交換規格(IGES)包含更多與設計相關的信息，然而對于許多順流制造業活動譬如迅速設計模型、數字控制(NC) 加工制造甚至有限元素分析來說，這些信息包含在立體平版印刷(STL)之中的信息是充足的。由于它的簡單和在各種各樣的工程學領域中的不同用途，立體平版印刷(STL)翻譯受到大多數計算機輔助設計和計算機輔助制造（CAD/CAM）系統的支持。在過去，立體平版印刷(STL)文件是負擔對內存分配和計算速度的任務。但是，隨著中央處理單元的加速，更多力量和存儲芯片逐漸變得更加便宜，這不再是轉換和處理立體平版印刷(STL) 文件時的一個障礙。此外，最新的三維掃描技術也促使反向工程的應用迅速增長，在反向工程應用中，創造很大并且很復雜的模型后，將它存放在立體平版印刷(STL)文件之中(Chuang 等2002) 。人們現在已經普遍接受這樣一個事實，分成三角形的表面和立體平版印刷(STL) 文件的應用將使設計和制造業應用變得越來越普遍。 在過去，人們已經學到了許多三軸機械加工刀具路徑的計劃方法 (Dragomatz 和Mann 1997) 。刀具路徑的產生方法可以分成兩種類型： 解析和參數(Zeid 1991) 。前者產生于橫切機械加工表面的短剖面飛機。而后者產生于沿著平面或者曲面走刀的數字控制刀具路徑，而刀具切削點(CL) 通常是用計算機從機械制造加工表面的設置來進行計算的(Kishinami等1987 年，Tang 等1995 年，Choi 等1997 年，Lee 2003 年)。參數設置方法在應用精確表面信息之中有其特定的優點，但是它可能不適合應用于加工帶有很多凸臺的復合表面并且很容易受到凹平面的損壞(Choi 和Jerard 1998) 。在另一方面，解析的方法的優點是可以產生沒有凹平面損壞現象的刀具路徑，但是它的缺點的是不能產生直線的走刀路徑和進行清角加工的刀具路徑(Dragomatz 和Mann 1997) 。所以，在零件的現實加工之中，解析和參數路徑的應用策略在互換性之中被運用。立體平版印刷(STL)加工主要是應用解析的加工策略，這是因?yàn)樗话型暾谋砻嫘畔?。在解析路徑?jì)劃之中，當切削刀具接觸到機械加工表面時， CLs就被計算出來。在解析路徑計劃之中一個最有效的方法是繪制Z軸 (Choi 等1988 年，Choi 1991 年，Saito 和Takahashi 1991 年，林和劉1998) 。繪制Z軸的方法計算柵格數據庫設置中的無干涉CLs。機械加工是精確度取決于庫柵格數據的密度。這通常是一個對柵格數據庫大的存儲空間的分配的需要。Hwang 和他的同事提出這樣一個方法，就是用平底刀、球頭刀和圓角精銑刀從三角形表面產生無干涉機械機械刀具路徑（Hwang 1992 年，Hwang 和Chang 1998) 。但是，這種方法是相對于不同的切削刀, 而且它的算法限制可切削刀類型的開發。盡管在現實之中使用著更多不同的切削刀具類型。例如，經常用一把細而利的精銑刀具作為淺槽的標號。它會繁瑣而笨拙地產生所有需要的刀具的不同算法和代碼。 本論文介紹一種直接產生刀具路徑的統一方法，這種方法是用通用的自動編程加工刀具(APT)在立體平版印刷(STL)的三角形表面上產生的(Kral 1986)。APT切削刀的拓?fù)浣Y(jié)構定義通常被用于數字控制的應用實例，但大多數刀具路徑的形成方法都是為特殊的刀具類型開發的，不的通用的 (Chung?等1998 年，Chiou and Lee 1999) 。在這里為所有刀具類型產生的刀具路徑形成是普遍的，在這里以包括球頭刀、平底刀和圓角精銑刀以及其它更多的刀具作為代表(圖3 和4)。從這個研究結果來看，只有一種系統的和統一的算法是必要的, 這個算法對通用APT切削刀的原則是非常兼容的。為了減少在處理一個大立體平版印刷(STL)文件時的計算時間，一個在區域詢問方面的高效方法產生了。 2、在三軸機械加工中的數字控制刀具路徑計劃 在實際的應用之中，數字控制刀具路徑可以適用于各種不同的機械加工過程(Choi 等1994) (圖1)： 圖1 數字控制刀具路徑計劃中不同的機械加工過程 主要規程包括粗加工、半精加工和去除咬邊加工(通常叫做平行加工或清角加工) 。用大尺寸的切削刀具和高的進給量進行粗加工（通常用平底精銑刀）可以高效率地去除龐大的重復材料。為得到一個更好的加工表面，在精加工之前通常通常要進行幾次半精加工(通常是用圓精銑刀和球頭精銑刀)。完成了半精加工之后，工件表面就留下均勻厚度的材料，這個厚度是作為精加工（通常是用小的球頭精銑刀）要去除的工序余量薄層。有時完成精加工后還需要進行平行加工和清角加工，因?yàn)檠乇诮沁吘売幸粋€(gè)咬邊的區域 (圖2)。一種更小的切削刀具是用在精加工之后的加工過程，以塑造局部角度外形或邊緣并且去除未切削的材料。根據上述討論，產生CLs通用切削刀具的一個統一方法的形成是不僅實用的, 而且更加容易實施和維護。因?yàn)橛杏行вX得方法來將三角形參數或所包含的表面的公差控制在允許的范圍內，在這里開發的算法能夠?qū)ζ胀ǖ挠?jì)算機輔助制造（CAM）產生一個‘核心引擎作用’。 圖2 咬邊區域 3、普通幾何形狀的APT 切削刀 根據APT 的定義，可以用如圖3所示的參數來將普通幾何形狀的切削刀具完整地描述出來： 圖3 普通幾何形狀刀具的參量 d、切削刀具直徑，刀具直徑是輻形距離兩倍，這個輻形距離的切削刀具軸到上部和下部直線段交叉點的距離計量的； r、壁角半徑； e 輻形距離，它是從切削軸到壁角圈子中心的距離，如果它的壁角和中心是在工具軸的同一邊，那么它是正面的，否則它就是反面的； f、從終點到壁角圈子中心的距離，這個距離是通過平行于工具軸來測量的。 切削刀具參數的值的必須與其內部的各種參數相一致，而且不能違背某些規定的約束，以便適當?shù)孛枋鲈试S范圍之內加工刀具的幾何形狀(Kral 1986)如圖4所示是切削刀具集合形狀的幾種選擇: 圖4 根據APT 定義的機械加工刀具形狀的幾種選擇 一些附屬參量的方法如下，被使用幫助描述CL 點的計算。這些附屬參數可用于幫助描述刀具切削點的計算。 R=+（Lc-tan1）tan2--------（1） 那里的半徑R，是切削刀具在加工零件表面上的最大伸出界限。這個界限將用于幫助尋找在伸出區域內的相交的三角形。從機械加工的切削刀具的幾何學外形來看，圓環圈子的半徑R1和R2 的計算方法如下： R1=（u+）/2-------------（2） 哪里 R2=e+（vsin(22)+）/2-----（3） 和 V=（（R-e）/tan2）-（Le-f） 哪里 L=Lc-f+----------（4） 距離L，是用半徑R2從圓環圈子的中心開始計量來進行計算的，計算的方法如下： L=Lc-f+ 在刀具參側面上距離分別為R1和R2的兩個不同的點從工具軸開始將機械加工切削刀具分成三個不同的區域。在上面的部分是錐體截面體其半徑是R，R2高度是L，中間部分是圓環半徑e和壁角圓半徑r，底部是半徑R1 和高度R1 圈子錐體tan_1。 通常,切削刀具側面不需要包含所有三個區域。比如在上圖4中是（a）圖，它的形狀是一個圓筒；在圖4中的(c)圖，花托成為一個半圓球；在圖4中的中(d)，它是一把逐漸變得尖細切削刀。 4、形成刀具切削區域的算法 數字控制加工中形成塑造傳統的實體模型的方法需要垂直于刀具切削表面（CL）的平面。雖然它在概念是簡單的，但是還是有幾的缺點。首先,垂直表面的形成不是一個瑣細的問題。在固體模型中，界限表示法(B Rep)模型是最普遍的代表形式。被整理的不均勻的B多槽軸(NURBS)表面的垂距是復雜的而且計算費用昂貴的操作。其次,被整理的表面的垂距可以容易地制造復雜的自身內部的交叉點和外部的交叉點(以毗鄰表面)問題。此外，這個統一的垂距表面只實用于球頭銑刀刀具切削區域的產生。用圓角銑刀加工形成的刀具切削區域垂距表面是一個更加困難的問題，更不用說更加通用的APT刀具?？偟膩碚f，用垂距表面在數字控制刀具路徑中產生傳統的實體模型在計算過程中是復雜的，而且計算的效率也很底。 此外，解析機械加工中，在給定部分參數表面后，機械加工刀具路徑是從垂距部分表面和平行于工具軸的一系列垂直平面的交叉點產生的。非線性等式解決的方法也許包含在要尋找的交叉點曲線中。對于一個立體平版印刷(STL)模型，因?yàn)榱慵砻嬉呀?jīng)被分成三角形，刀具路徑的形成是從多面體表面開始計算CLs的。在許多情況下,唯一線性運算是很有必要的。如圖5所示，切削刀具與零件表面接觸的地方叫做刀具接觸點（CC），而刀具的端點被定義為刀具切削點。在機械加工中，刀具接觸點（CC）并不是固定的，而刀具切削點（CL）的x-y 坐標值可以任意確定(多數情況下是落在固定的網格點)。唯一的未知數就是刀具切削點的Z軸坐標值。因此，刀具路徑通常的由很多連續的刀具切削點組成。當工具軸向二維點(xc,yc)移動時，零件表面將形成一個區域，這個區域是半徑為R的二維圓組成的，這個二維圓的圓心在(xc,yc)點上。這個區域叫做刀具接觸點（CC）（圖5）。 圖5 CC點、CL點和CC區域 本文提出一種計算無推斷從零件表面的那些小的三角形來的刀具切削點（CL）的算法，這些零件表面與刀具接觸點（CC）區域是重疊的。當切削刀具與一個三角形多面體接觸時，刀具接觸點（CC）可能位于端點、小平面或者是邊沿上。對于切削刀具本身，刀具接觸點（CC）可能與包絡線、花托區域或更低的錐體連在一起。對于這些各種各樣的聯系情況，刀具切削點（CL）的計算方法是不相同的。先確定接觸區域和刀具接觸點（CC）是非常必要的，然后從刀具接觸點（CC）區域可以計算出刀具路徑的刀具切削點（CL）。對于一把普通的APT 切削刀具，有九類型計算模型。實際上， 并不是每把切削刀具都包含有三個區域。通常，一把切削刀具只包含有一個或者兩個切削區域（圖4）。刀具切削點（CL）的計算過程首先是從分成三角形小平面的刀具接觸點（CC）區域開始的。這是一個節約時間的策略，因?yàn)槿绻毒呓佑|點（CC）小平面里面， 切削刀具就不接觸到端點或者三角形的邊沿，因此，后面二者更加費時的步驟就可能得到避免。 8 Numerical control machining of triangulated sculptured surfaces in a stereo lithography format with a generalized cutter A unified approach to the generation of numerical control tool paths for triangulated sculptured surfaces in a stereo lithography format using a generalized cutter is presented. This is important because the use of a stereo lithography format for representing a computer-aided design model has been widely accepted in industry for quite some time. It is not only just because of an application such as rapid prototyping (RP), which specifically requires the use of it, but also it is due to the fact that complex stereo lithography models can now be created directly by the digitization and reverse engineering process. Although many computer-aided design/computer-aided manufacturing software systems support the translator of stereo lithography files, only a few papers have addressed the issue of numerical control machining directly from a stereo lithography file. A general computing algorithm to generate tool paths by using a generalized automatically programmed tools cutter is presented. It is general in the sense that it can be applied to various cutters including ball, flat and fillet end-mills. To reduce the computation time, an efficient method for the region query of a tessellated mesh is also presented. Simulations as well as real machining examples are given to illustrate the effectiveness of the proposed method. 1. Introduction Currently, most computer-aided design (CAD) systems use parametric surfaces to represent the geometry of a CAD model. To transfer models between different CAD/computer-aided manufacturing (CAM) systems for various designs or manufacturing processes, neutral data files such as Initial Graphics Exchange Specification (IGES) are used extensively (US Product Data Association 1996). IGES describes the possible information to be used in building a CAD model, the parameters for the definition of model entities and the relationships between different entities. However, the translation of CAD models using IGES is not always easy because most CAD systems use different internal representations and the conversion is not always straightforward and error free. In contrast to IGES, the stereo lithography (STL) format is simple and its implementation is easy (Jacobs and Reid 1992, Kochan 1993). Basically, an STL file contains only triangles and their normal vectors. The STL file is not intended to replace IGES, which contains more design-related information, nevertheless the information contained in STL is sufficient for many downstream manufacturing activities such as rapid prototyping, numerical control (NC) machining and even finite-element analysis. Because of its simplicity and use in various engineering fields, STL translation today is supported by most CAD/CAM systems. In the past, large STL files had been a burden to memory allocation and computation speed. However, as the central processing unit cranks up more power and memory chips become less expensive, this is no longer a barrier for the transfer and processing of STL files. Furthermore, the latest three-dimensional scanning technology also helps the rapid growth of the reverse engineering application in which very large and complex models are created and stored in STL files (Chuang et al. 2002). It is generally agreed that the use of triangulated surfaces and STL files for design and manufacturing applications will become increasingly popular. In the past, many path-planning approaches for three-axis machining have been studied (Dragomatz and Mann 1997). The tool-path generation methods can be categorized into two types: Cartesian and parametric (Zeid 1991). The former is generated from cross-section planes that intersect the machined surfaces. The latter generates NC tool paths along constant u or v surface curves and the cutter location (CL) point is usually computed from the offset of the machined surface (Kishinami et al. 1987, Tang et al. 1995, Choi et al. 1997, Lee 2003). The parametric method has the advantage of utilizing accurate surface information, but it might not be suitable for machining a compound surface consisting of surface patches and is susceptible to concave gouging (Choi and Jerard 1998). On the other hand, the Cartesian method is good at generating gouging-free tool paths but it lacks the ability to generate pencil cuts or cornering cuts (Dragomatz and Mann 1997).Therefore, in the machining of a real-world part, both Cartesian and parametric path generation strategies are used interchangeably. STL machining primarily employs the Cartesian machining strategy since it does not contain the full surface information. In Cartesian path planning, CLs are calculated when the cutter touches the machined surface. One of the most robust methods in Cartesian path planning is the Z-map method (Choi et al. 1988, Choi 1991, Saito and Takahashi 1991, Lin and Liu 1998). The Z-map method computes the interference-free CLs from a grid data set. The precision of machining is dependent on the density of the grid data. There is usually a need for a large memory space to be allocated for the grid data. Hwang and colleagues presented a method to generate interference-free tool paths from tessellated surfaces by using flat, ball and fillet end-mills (Hwang 1992, Hwang and Chang 1998). However, the method treats each cutter separately, and algorithms were developed for limited cutter types. In practice, however, there are more different types of cutter that are being used. For example, a tapered and sharp end mill is often used for marking thin grooves. It would be tedious and cumbersome to develop separate algorithms and codes for all the needed cutters. The present paper presents a unified approach to the tool path generation directly from the triangulated surface of an STL model by using a generalized automatically programmed tools (APT) cutter (Kral 1986). The topology definition of an APT cutter is usually used for NC verification, but most tool path generation approaches are developed for specific types of cutters and are not general (Chung et al. 1998, Chiou and Lee 1999). The method presented here is general in that it can be applied to all types of cutter represented by the APT cutter, which includes the frequently-used ball, flat and fillet end-mills, and more (figure 3 and 4). From this research result, only one systematic and unified algorithm is needed, which is very compatible to the principle of the APT generalized cutter. To reduce the computation time when dealing with a large STL file, an efficient method for the region query has presented。 2. Numerical control-path planning in three-axis machining In practical application, NC paths are generated for different machining procedures (Choi et al. 1994) (figure 1)： Figure 1. Different machining procedures in NC path planning. The main procedures include rough cut, semifinish cut, finish cut and undercut removal (often called pencil cut or corner cut). With large size cutter and high feed rate, the rough cut (usually with a flat end-mill) is designed to remove efficiently bulky redundant material. For a better cutting result, there are usually several semifinish cuts (usually with fillet end-mills or ball end-mills) preceding the finish cut. After the semifinish cut, a uniform thickness of material remains on the final surface before the finish cut (usually with a small ball end-mill) is used to remove this thin layer. At times there is a need to generate a pencil cut or corner cut after the finish cut because there is an undercut region along the corner edge (figure 2). An even smaller cutter is used in this ‘clean-up’ machining procedure to contour around corners or edges to remove uncut material. Based on the above discussion, a unified approach that can generate CLs for a generalized cutter is not only practical, but is also easier to implement and maintain. Since there are robust algorithms to triangulate parametric or implicit surfaces under a controlled tolerance, the algorithm developed here can serve as a ‘core engine’ for a general CAM package. Figure 2. Undercut region. 3. Generalized geometry of an APT cutter According to the definition of APT, the generalized cutter geometry shown in figure 3 can be described fully by the following parameters: Figure 3. Parameters for a generalized cutter geometry. d cutter diameter, which is twice the radial distance measured from the cutter axis to the intersection of the lower and upper line segments, r corner radius, e radial distance from the cutter axis to the centre of a corner circle; it is positive if its corner and centre are on the same side of the tool axis, otherwise it is negative, f distance from the endpoint to the centre of corner circle measured parallel to the tool axis. The cutter parameter values must be consistent among themselves and not violate certain restrictions so that permissible geometries are properly described (Kral 1986). Several selections of cutter shapes are shown in figure 4. Figure 4. Some selections of cutter shape based on APT definition. Some dependent parameters are derived as follows. They are used to help escribe the computation of CL points. R=+（Lc-tan1）tan2--------（1） where the radius, R, is the maximum boundary of the cutter projecting on the part surface. The boundary will be used to find the intersected triangles in the projected region. From the geometric profile of the cutter, the radius of ring circles R1 and R2 can be computed as follows: R1=（u+）/2-------------（2） Where R2=e+（vsin(22)+）/2--------（3） And V=（（R-e）/tan2）-（Le-f） where L=Lc-f+----------------（4） The distance, L, measured from the centre of ring circle with radius R2 is computed as follows: L=Lc-f+ The two distinct points on the cutter profile with distances of R1 and R2, respectively,from the tool axis divide the cutter profile into three different regions. On the top is a frustum of cone with radius R, R2 and height L, the median part is a torus of ring radius e and corner circle radius r, and the bottom is a circle cone of radius R1 and height R1 tan_1. Generally, a cutter profile needs not contain all the three regions. As shown in figure 4(a),the shape becomes a cylinder; in figure 4(c), the torus becomes a semisphere; in figure 4(d), it is a taper cutter. 4. Algorithm for generating cutter locations A traditional solid modelling approach to NC machining requires the generation of offset surfaces to approximate the CL surfaces. Although it is simple in concept, there are several shortcomings. First, the generation of offset surfaces in itself is not a trivial problem. In solid modelling, a boundary representation (B-Rep) model is the most popular representational form. The offset of trimmed non-uniform rational B-splines (NURBS) surfaces is a complex and computationally expensive operation. Second, the offset of multiple trimmed surfaces can easily create complex selfintersection and global-intersection (with adjacent surfaces) problems. Third, the uniform offset of surfaces is only useful to the generation of CL points for ballend mills. The offset of CL surfaces for fillet-end mills is a more difficult problem, not to mention the more general case of APT cutters. Overall, the traditional solid modelling approach to NC tool-path generation by surface offsetting is complex in calculation and inefficient in computation. Furthermore, in Cartesian machining, given a parametric part surface, the tool path is generated from the intersection of the offsetting part surface and a series of vertical planes parallel to the tool axis. Non-linear equation solving may be involved for finding the intersection curves. For an STL model, however,since the part surface is already triangulated, the tool path generation is to compute the CLs from the polyhedral surface. In most cases, only linear operations are needed. As shown in figure 5, the point of the cutter contacting the part surface is called a cutter-contact (CC) point, and the endpoint of a cutter is defined as a CL point. During machining,the CC point is not fixed, but the x–y locations of the CL point can be arbitrarily determined (most times falling on fixed grid points). The only unknown to be found is the z component of the CL point. Therefore, the tool path usually consists of a sequenced series of CL points. When the tool axis moves to a two-dimensional point (xc, yc), there exists a region on the part surface, enclosed by a two-dimensional circle with radius R, and centred at (xc, yc). It is called a CC region (figure 5). Figure 5. CC point, CL point and CC region. This paper presents an algorithm to compute the inference-free CL point from those triangular facets of the part surface that are overlapped with the CC region. When a cutter makes contact with a triangular polyhedron, the CC point may be located at a vertex, a facet or an edge. For the cutter itself, the CC point may be contacted on the taper envelope, the torus region or the lower cone. For these various contact conditions, the computations of CL points are not the same. It is necessary to determine the contact regions and CC points first, and then from the locations of CC points, the CL points of the tool path can be calculated. For a generalized APT cutter, there are nine types of computation model. In reality, not every cutter profile contains all the three regions. Very often, a cutter usually contains only one or two cutting regions (figure 4).The CLpoint_computation procedure begins the computation of the CC point with the triangular facet first. This is a time-saving strategy because if the CC point is located inside the facet, then the cutter does not touch the vertices or edges of the triangle and, therefore, the latter two more time-consuming steps can be avoided. 8