購買設計請充值后下載，，資源目錄下的文件所見即所得，都可以點開預覽，，資料完整，充值下載可得到資源目錄里的所有文件。。?！咀ⅰ浚篸wg后綴為CAD圖紙，doc,docx為WORD文檔，原稿無水印，可編輯。。。具體請見文件預覽，有不明白之處，可咨詢QQ:12401814
河北建筑工程學院
畢業設計（論文）
課題
名稱
QTZ40塔式起重機總體及起升系統的設計
系： 機械工程系
專業： 機械設計制造及其制動化
班級： 機094
姓名： 陳福海
學號： 2009307426
起迄日期：2013年3月25日~ 2013年 6月21日
設計（論文）地點: 綜405
指導教師： 李常勝
目錄
第1章 前言·················································································1
1.1塔式起重機概述········································································1
1.2塔式起重機的發展趨勢································································1
第2章 總體設計···········································································1
2.1 概述···················································································2
2.2 總體設計方案的確定··································································2
2.2.1金屬結構···········································································2
2.2.2工作機構··········································································19
2.2.3安全保護裝置·····································································26
2.3總體設計原則······································································· 28
2.3.1整機工作級別································································· 28
2.3.2機構工作級別································································· 28
2.3.3主要技術性能參數··························································· 29
2.4平衡臂與平衡重的計算·······························································29
2.5起重特性曲線··········································································31
2.6塔機風力計算··········································································32
2.6.1工作工況Ⅰ······································································33
2.6.2工作工況Ⅱ······································································36
2.6.3非工作工況Ⅲ ··································································39
2.7整機的抗傾翻穩定性計算····························································41
2.7.1工作工況Ⅰ·······································································42
2.7.2工作工況Ⅱ········································································43
2.7.3非工作工況Ⅲ·····································································44
2.7.4工作工況Ⅳ·······································································45
第3章 起升機構的設計和計算·······················································47
3.1起升機構的形式·······································································47
3.2 確定起升機構滑輪組倍率···························································49
3.3 鋼絲繩的選擇········································································50
3.4 確定卷筒的尺寸·····································································51
3.5 選擇電動機···········································································52
3.6計算傳動比，確定卷筒直徑·························································53
3.7 校驗卷筒··············································································54
3.8 選擇滑輪··············································································54
3.9 選擇減速器、制動器、聯軸器······················································55
3.10 電動機及起升機構起、制動時間校驗············································58
第4章 吊鉤組的設計····································································61
4.1 吊鉤組的形式·········································································61
4.2 吊鉤的形式············································································61
4.3 吊鉤計算···············································································62
4.4 吊鉤橫梁計算·········································································64 畢業設計小結··············································································66
參考文獻·····················································································67
摘要
塔式起重機作為建筑施工的主要設備，在建筑等行業發揮著極其重要的作用。塔式起重機屬于臂架型起重機，由于其臂架鉸接在較高的塔身上，且可回轉，臂架長度較大，結構輕巧、安裝拆卸運輸方便，適于露天作業，因此大多數用于工業與民用建筑施工。
塔式起重機是為了滿足高層建筑施工、設備安裝而設計的新型起重運輸機械，QTZ40塔式起重機是由建設部長沙建設機械研究院設計的新型建筑用塔式起重機，該機為水平臂架，小車變幅，上回轉自升式多用途塔機。
本設計的題目是固定式QTZ40塔式起重機起升系統的設計。QT40塔式起重機有多種形式，此次設計的形式為上回轉液壓頂升自動加節，可隨著建筑物的升高而升高，固定式高度為36米，在附著狀態下可達到100米，其工作幅度為50米。
本設計書主要包括四部分：第一部分主要是對現今國內外塔式起重機的發展現狀、趨勢以及QTZ40塔式起重機特點、應用場合，做了一個簡要的概述；第二部分是QTZ40塔式起重機總體方案的選擇及總體設計計算過程；第三部分是起升機構設計和計算；第四部分是吊鉤組的設計。
關鍵詞： QTZ40塔式起重機 起升機構 吊鉤組
ABSTRACT
As an important facility, the tower crane plays an important role in construction industry. The tower crane belongs to the arm rack type crane. Its arm is hinged on the high tower body, and it may rotate. It has longer arm, dexterous structure. What’s more, it is easy to be assembled, disassembled and transported. It is suitable for the open-air work and mainly used for industry and civil construction
Tower cranes are to meet high-rise construction building, equipment installation and design as a new type machinery of lifting transport. The QTZ40 tower cranes are new tower cranes designed by Changsha Institute of the Ministry of Construction Machinery used in construction building. The aircraft is horizontal boom, trolley luffing, on the back or decanted from the tower-type multi-purpose machines .
The design topic is the stationary QTZ40 tower crane system and the design of lifting structure. There are many kinds of QTZ40 tower crane. The form of this design is as below. With an upper rotating hydraulic pressure propping system, the machine could add height automatically and thus rise with the building ascension. The stationary type is 36meter high; it could reach the height of 100meters when it is being adhered. Its work scope is 50 meters.
This design book mainly includes four parts. The first part summarizes the present situation and the development tendency of the Tower crane in both our country and abroad, as well as the characteristic and application occasion.The second part is the QTZ40 tower crane overall concept choice and the system design computation process; the third part is the organization design and the computation of lifting mechanism;and the last is the design of the hook group.
KEY WORDS: QTZ40 tower crane lifting mechanism hook group