2358 車床濾油器加工工藝及關鍵工序工裝設計

2358 車床濾油器加工工藝及關鍵工序工裝設計,車床,濾油器,加工,工藝,關鍵,癥結,樞紐,工序,工裝,設計 南京理工大學泰州科技學院畢業設計說明書( 論文)作 者 : 吳煒學 號：05010140系 　 部 : 機械工程專 業 : 機械工程及自動化題 目 : 車床濾油器加工工藝及關鍵工序工裝設計指導者： 評閱者： 2009 年 6 月龔光容 教授畢 業 設 計 說 明 書 （ 論 文 ） 中 文 摘 要本文主要論述了濾油器的加工工藝及其夾具設計。在制定工藝過程中，要確定各工序的安裝工位和該工序需要的工步，加工該工序的機車及機床的進給量，切削深度，主軸轉速和切削速度，該工序的夾具，刀具及量具，還有走刀次數和走刀長度，最后計算該工序的基本時間，輔助時間和工進時間。組合機床“三圖一卡”就是針對具體零件，在選定的工藝和結構方案的基礎上進行組合機床總體圖樣文件設計。其內容包括：繪制被加工零件圖、加工示意圖、機床聯系總圖、機床生產率計算卡等。夾具設計方面要針對連桿結構特點比較小，設計應時應注意夾具體結構尺寸的大小等，最終就能達到零件的理想要求！關鍵詞 加工工藝 組合機床設計畢 業 設 計 說 明 書 （ 論 文 ） 外 文 摘 要Title Processing Technology and Key Process Equipment Design of CA6140 Oil Filter AbstractThe thesis is about processing Technology of Oil Filter and their grip design. In the course of making the craft , is it confirm every erector location and worker step that process need this of process to want, the locomotive of processing , this process , and the entering the giving amount of the lathe, cut depth , the rotational speed of the main shaft and speed of cutting, the jig of this process, the cutter and measuring tool, a one hundred sheets of number of times still leaves and a one hundred sheets of length leaves, calculate basic time of this process , auxiliary time and service time of place of working finally. Combination Machine "three plans a card" is for specific parts, in selected technology and structure of the programmer on the basis of the overall composition of machine design document design. Its contents include: Drawing be processed parts map, diagram processing, machine tools contact the map, calculating productivity machine cards. Should be comparatively small specifically for connecting rod structure characteristic in the field of grip design , design that the size should pay attention to gripping the concrete structure dimension of the season waits, the ideal being therefore likely to reach a part ultimately demands.Keywords Processing technology, Design of clamping device combination machine