四缸發動機曲軸機械加工工藝和鉆兩邊斜油孔專用夾具設計

四缸發動機曲軸機械加工工藝和鉆兩邊斜油孔專用夾具設計,發動機,曲軸,機械,加工,工藝,兩邊,斜油孔,專用,夾具,設計 畢業設計（論文）任務書 設計（論文）題目：四缸曲軸加工工藝及夾具設計 系： 機電系 專業： 班級： 學號： 學生： 指導教師： 接受任務時間 教研室主任 （簽名）　　系主任 （簽名） 1．畢業設計（論文）的主要內容及基本要求 （1）基本設計參數： ①490型柴油機。 ②生產方式：批量生產 （2）.主要內容及基本要求 ①測繪柴油機曲軸的總成圖和零件圖。 ②確定加工方法，制定加工工藝，編制加工工序卡。 ③進行曲軸斜油孔加工的工裝設計。 ④編寫設計說明書。 2．指定查閱的主要參考文獻及說明 ①《機械制造工藝手冊》 ②《機械制造技術基礎》 ③《機械制造裝備》 ④《夾具設計》 3．進度安排 設計（論文）各階段名稱 起 止 日 期 1 查閱資料，了解曲軸的功能以及加工制造的基本知識 3月5日—3月25日 2 完成曲軸的裝配圖和零件圖的繪制 3月26日—4月10日 3 確定加方法.制定加工工藝.完成工裝設計 4月11日—5月22日 4 完成設計計算說明書的編寫 5月23日—6月2日 5 設計圖紙與說明書的校對 6月3日—6月5日 專 業 機械加工工序卡片 產品型號 零(部)件圖號 A1 共 1 頁 機制 產品名稱 柴油機 零(部)件名稱 曲軸 第 1 頁 車 間 工 工序號 工序名稱 材 料 牌 號 機加 21，22 鉆φ10斜油孔 QT600-3 毛坯種類 毛坯外形尺寸 每 批 件 數 每 臺 件 數 鑄造 長667，直徑φ71 設備名稱 設備型號 設 備 編 號 同時加工件數 鉆床 Z9416 臥式鉆床 1 夾具編號 夾具名稱 工 位 器 具 編 號 工位器具名稱 鉆床專用夾具 冷 卻 液 工序工時 準 終 單 件 工 步 號 工 步 內 容 工 藝 裝 備 主軸轉速(轉/分) 切削速度(米/分) 走刀量(毫米/轉) 吃 刀 深 度 (毫米) 走刀次數 工 時 定 額 描 圖 機動 輔助 描 校 1 鉆中間兩斜油孔φ10，深132 M9416 臥式鉆床 250 8 0.36 1 5 1 1.54 2 鉆兩邊斜油孔φ10，通孔 M9416 臥式鉆床 250 8 0.36 5 1 1.16 底圖號 , 裝訂號 編制 (日期) 審核 (日期) 會簽 (日期) 班級 姓名 標記 處數 更改文件號 簽字 日期 標記 處數 更改文件號 簽字 07.5.20 03.3 周前洪 專 業 機械加工工藝過程卡片 產品型號 零(部)件圖號 A1 共 2 頁 機制 產品名稱 零(部)件名稱 曲軸 第 1 頁 材料牌號 QT600-3 毛坯 種類 鑄造 毛坯外 形尺寸 長667，直徑φ71 毛坯件數 批量生產 每臺件數 備 注 工 工 序 車 工 工 時 序 工 序 內 容 設 備 工 藝 裝 備 準 單 號 名 稱 間 段 終 件 1 車 粗、精車左端面，粗車3mm,精車0.5mm 機加 CA6140 YG5端面車刀，游標卡尺，專用夾具， 2 車 粗、精車右端面, 粗車3mm,精車0.5mm 機加 CA6140 YG5端面車刀，游標卡尺，專用夾具 3 車 粗、精車主軸頸Ⅰ，由φ71車至φ64保證質量 機加 CA6140 YG5外圓車刀，專用夾具，游標卡尺 4 車 粗、精車主軸頸Ⅱ，由φ71車至φ64保證質量 機加 CA6140 YG5外圓車刀，專用夾具，游標卡尺 5 車 粗、精車主軸頸Ⅲ，由φ71車至φ64保證質量 機加 CA6140 YG5外圓車刀，專用夾具，游標卡尺 6 車 粗、精車主軸頸Ⅳ，由φ71車至φ64保證質量 機加 CA6140 YG5外圓車刀，專用夾具，游標卡尺 7 車 粗、精車主軸頸Ⅴ，由φ71車至φ64保證質量 機加 CA6140 YG5外圓車刀，專用夾具，游標卡尺 描 圖 8 車 粗、精車主軸頸兩邊壁面 機加 CA6140 YG5端面車刀，專用夾具，游標卡尺 9 車 主軸頸端壁面倒角R3、保證粗糙度Ra=0.4 機加 CA6140 YG5，45度車刀，專用夾具，游標卡尺 描 校 10 車 粗、精曲柄銷Ⅰ，由φ63車至φ56保證質量 機加 CA6140 YG5外圓車刀，專用夾具，游標卡尺 11 車 粗、精曲柄銷Ⅳ，由φ63車至φ56保證質量 機加 CA6140 YG5外圓車刀，專用夾具，游標卡尺 底圖號 12 車 粗、精曲柄銷Ⅱ，由φ63車至φ56保證質量 機加 CA6140 YG5外圓車刀，專用夾具，游標卡尺 13 車 粗、精曲柄銷Ⅲ，由φ63車至φ56保證質量 機加 CA6140 YG5外圓車刀，專用夾具，游標卡尺 裝訂號 編制 (日期) 審核 (日期) 會簽 (日期) 班級 姓名 標記 處數 更改文件號 簽字 日期 標記 處數 更改文件號 簽字 日期 專 業 機械加工工藝過程卡片 產品型號 零(部)件圖號 A1 共 2 頁 機制 產品名稱 零(部)件名稱 曲軸 第 2 頁 材料牌號 QT600-3 毛坯 種類 鑄造 毛坯外 形尺寸 長667，直徑φ71 毛坯件數 批量生產 每臺件數 備 注 工 工 序 車 工 工 時 序 工 序 內 容 設 備 工 藝 裝 備 準 單 號 名 稱 間 段 終 件 14 車 粗、精車曲柄銷兩邊壁面 機加 CA6140 YG5端面車刀，游標卡尺，專用夾具， 15 車 曲柄銷兩邊倒角R3 、Ra=0.４ μm 機加 CA6140 YG5，45度車刀，游標卡尺，專用夾具 16 車 粗、精車左端外圓、倒角C2 （Ra6.3） 機加 CA6140 YG5外圓車刀，專用夾具，游標卡尺 17 鉆 鉆主軸頸孔104，通孔 機加 Z525 麻花鉆，專用夾具，游標卡尺 描 圖 18 鉆 鉆右端孔46、8、擴孔52M7 機加 Z525 麻花鉆，專用夾具，游標卡尺 19 攻 加工螺紋孔8M8 機加 Z525 麻花鉆，專用夾具，游標卡尺 描 校 20 銑 2銑鍵槽1263、1216 機加 XA6132 盤銑刀銑鍵槽，專用夾具，游標卡尺 21 鉆 鉆中間兩個斜油孔10、深132 機加 專用機床 麻花鉆，專用夾具，游標卡尺 底圖號 22 鉆 鉆兩邊斜油孔10通孔 機加 專用機床 麻花鉆，專用夾具，游標卡尺 23 校核 裝訂號 編制 (日期) 審核 (日期) 會簽 (日期) 班級 姓名 標記 處數 更改文件號 簽字 日期 標記 處數 更改文件號 簽字 日期 目 錄 中文摘要 Ⅰ 英文摘要 .............Ⅱ 第1章 設計的相關知識...........................................................................................1 1.1 畢業設計的目的、要求和內容 1 1.1.1 畢業設計的目的 1 1.1.2 畢業設計的基本要求及主要內容 1 1.2 畢業設計的步驟 2 1.2.1機械加工工藝規程設計 2 第二章 零件的分析 3 2.1 零件的作用及分析 3 2.2 曲軸的制造技術及工藝進展 ....3 2.2.1 曲軸的毛坯制造技術......................................................................................................3 2.2.2 機械加工技術..................................................................................................................4 2.2.3 熱處理和表面強化處理技術..........................................................................................4 第三章 零件的工藝路線及加工工藝.................................................................................5 3.1擬定工藝路線應注意的事項...............................................................................................5 3.2 零件的工藝路線..................................................................................................................6 3.2.1 基準的選擇.......................................................................................................................6 3.2.2 曲軸工藝路線內容...........................................................................................................6 3.2.3 零件加工工序內容...........................................................................................................7 第四章 專用夾具設計及撰寫說明.......................................................................................35 4.1 專用夾具設計......................................................................................................................35 4.1.1 設計說明..........................................................................................................................35 4.1.2 夾具設計分析..................................................................................................................35 4.2 撰寫說明書應注意的事項..................................................................................................36 第五章 結 論............................................................................................................................37 參考文獻........................................................................................................................38 致 謝..........................................................................................................................39 可持續夾具及固定裝置的高精度安裝的方法論 J. Jamshidi，P.G. maropoulos 英國巴斯大學機械工程學系 摘要 在夾具安裝階段，夾具組件的精確測量能力決定其精確性，尤其是對大尺寸的產品和應用來說。大量定制一些在設計上有多樣性的小批量產品和零部件是十分重要的。產品質量應該與迅速轉換理念相互協調，對于敏感元器件及組件而言，以犧牲產品質量來提高速度是不明智的，例如在航空航天工業中所看到的那些零部件。提高精確性對于夾具的安裝是很有必要的，為了要盡量少用，這可取決于夾具和夾具定位變化的耐受性預算。在航空航天工業中，靈活和可重構夾具的概念的發展及固定裝置是夾具的主要開銷成本。吸引他們的是重構夾具的可重用性，可持續使用是由于那些零部件也能夠被重新應用到許多種產品和裝配中去。一直不佳的準確性和可靠性為這類夾具的缺點，這篇論文主要是研究可持續夾具主要零部件的精確定位，影響夾具性能的因素在安裝階段會得以審查。本文介紹了一種在靈活夾具中為了最大限度地減少定位和夾緊的不確定性的方法。 關鍵詞:可持續性夾具；夾具安裝；校準不確定性；夾具的監測；計量；可重復使用的夾具 1引言 質量和可靠性等因素早已經轉換為新零件固有的特征。在他們的產品和服務范圍內，近期市場趨勢已經迫使制造業走向大規模定制。其次增加新陳品的多樣化設計在部件和組件級別上遵循第二次高幅度的變化。有先進制造系統和技術的國家提供了更多的靈活性，能使設計師更加自由的發揮想象。例如在過去幾十年發展起來的一種新的大體積測量方法，就能測量及公丈的距離。用來檢測大尺寸零件的這些設備通常是由多個組裝部件所制造出來的。在重組和裝配期間，那些大尺寸產品的制造需要用到專用的夾具和固定裝置，以便于他們的零部件能夠被定位在設計基準上。對于大批量產品，在計算機輔助軟件上就能估算出其主要的花費需求，否則，在某些情況下或以其他方式生產的產品成本可能會是非常高的。這個問題與客戶不斷用錢來尋求具有更高價值的市場需求相互矛盾。用一種典型的變化產品可以創建一個更加具有持續性的商業，因?yàn)樗軌驖M足相對比較大地市場需求。由支持產品變化的不同形狀的產品而形成的靈活和可重構夾具及固定裝置則是應對上述挑戰關鍵的解決方案。靈活夾具的概念已經在研究領域存在了幾年[1]。然而，它們在很大程度上沒有充分利用真正的生產設施，尤其是大尺寸產品的制造，如航空航天設備。這是由于關于它們的初始安裝、校準困難和可重復性等挑戰往往超出公差要求。這些夾具和高品質關鍵部件裝置的制造以及大量的集成計量系統，都可以減少上述限制。本文包括了有關安裝的計量問題和靈活的夾具校準以及檢測服務。 2相關工作 2.1大型零件的制造和裝配 通常把要精密制造的機械零件移動到機床工作臺是必需的，先進行粗加工，然后精對準和夾緊。在這個階段，一方面是準備用于加工高精度的關鍵所在，然而，這對于一些大尺寸或重的零部件并不總是可以實現的。大型產品是指那些與一些不經濟的可能需要處理或在工廠周圍移動的的組件一起來達到制造和裝配的目的[2]。制造業和這些部件的裝配工藝包括所需機器和系統的運動以及這些部件的位置和方向。這些零部件通常定位在大尺寸夾具及固定裝置上該定位的位置。如果這些部件以小批量生產，在航空航天工業、高開銷的情況下，每個產品將會出現。在設計和制造夾具上，已經有了許多嘗試，以便于能夠持有許多種組件的變種。然而，這方法是不可行的，因?yàn)槊舾谢蜿P(guān)鍵的零部件完全是由它們的高精度要求所決定的。與固定的夾具相比較，可調、可重構夾具會產生更低的重復性。固定夾具有固定的方式，可以通過焊接或鉚接的接頭固定在一起來實現。這些機械故障，例如夾具和固定裝置由于疲勞和塑料變形就是一個終止其服務的主要原因，發送它們再進行回收。小批量制造的需求是目前常見的淘汰不合格夾具，其使用壽命取決于產品的生命周期。換句話說，在制造變種零件停止不久之后，與之有關聯的夾具和固定裝置將會變得多余。即使夾具有工作順序，但它們?nèi)匀挥袌髲U并送往循環再造。這種方法會帶來高負擔回收的能耗。在大尺寸零件下的固定夾具和夾具的漂移以及夾具都能影響大尺寸零件組裝的精確性[5]。對于大尺寸的夾具已經開發出了幾種分析夾具剛性的方法，可用來評估振動的影響因素。在任何情況下更加可持續生產要通過選擇性方案才能得以實現。如圖2.1所示。 圖2.1 典型的大型夾具元件 用于制造所延誤的時間是固定夾具的又一重大缺點，這些夾具應該在制造前就被訂購，在生產計劃和產品上市前還可以創建額外的復雜性。不管他們的類型，大型夾具有一些共同的元素，包括一個主框架、內在的框架，有可能有一個或數多個可移動的機制或更小的組件，如鉗、套管、皮卡和可調螺絲[表1]。 2.2柔性夾具 開發的柔性夾具的概念增加了其可持續性、快速轉換以及降低了成本?，F(xiàn)在可以使用現成的模塊來設計和組裝夾具。根據規定，只有極少數夾具的專用零件需要設計和制造。以這種概念看，大多數散裝部件、附件關節都應用的很具體。一旦產品設計變異完全制造出來，然后就可以拆卸上述組件和重組成一種新的元件來與未來的設計變異相匹配。因?yàn)榻M裝和組件范圍上的設計都相當接近，所以這種方法是最能降低夾具成本的。 根據組件的變化水平和工作類型的需求，每一個不同比例的柔性夾具都需要被重新安排。為了增加使用這種類型夾具的效益，這個問題在設計階段考慮是十分重要的。例如，在可能的情況下，皮卡車的位置和三維定位夾具上的組件的不同變種，甚至完全不同的部分應該是在靠近增加兼容性和夾具子系統間變性。夾具關鍵部件的收集在短期內能保證所需夾具的可用性。另外，這些夾具的存儲需要很少空間，因?yàn)椴鸪心K是可能的，通常以腳手架的形式并把它們彼此放在一起。目前在一些汽車公司應用到柔性夾具，因?yàn)樗鼈兊木鹊燃壥亲銐驖M足的。大尺寸制造的夾具設施盡管沒有許多柔性夾具那樣操作靈活，比如航空航天設備。準確性和定位銷的不確定性、夾具的可重復性以及夾具結構的漂移都出現這樣一個事實，這些夾具在發電和航空航天等工業不能滿足公差要求。一旦它們的精度問題得以解決，這些夾具在上述的工業中將會有很高的利用價值。 圖2.2 夾具與汽車行業中的可重構組件 大量的體積計量系統和技術一直有許多新的發展。依靠計量系統和技術的現代激光技術現在就能夠測量一些可接受精度的大尺寸產品甚至到幾公丈的產品。在安裝和初期安裝調試期間，這些系統能夠用來精確定位一些夾具的關鍵部件。 夾具的安裝通常開始形成機架或主要框架，然后是那些大的部件和像皮卡和夾具那樣逐漸更小的零部件。計量系統能夠用于柔性夾具的主要框架和其內部框架的安裝，從而來保證每個零部件彼此之間的準確定位。表1顯示了這些大規模的測量系統數。跟蹤系統能夠測量基準點，它是實現這一目的的最合適的測量系統。一起跟蹤球式反射鏡在三維空間內都可以認準所要記錄的位置。球式反射鏡可以直接練習目標對象來提供幾何位置信息或可以在機械重復的球式反射鏡下應用，從這個角度用激光來跟蹤目標或短期目標。像一些其他測量儀器的激光跟蹤有時候不確定，在夾具的安裝過程中需要做以說明。此外，激光跟蹤和目標點之間的光線問題還應該考慮到。如果必要的話，多個跟蹤職位都可以使用，在實際測量活動中，其結果必然是伴隨著一個不確定的說明。經過測量，這些給定的分散的特征值是合理的，這個問題與一些夾具或夾具的安裝及以后的審核都是一樣的。這些知識闡明了一個給定的定位夾具的能力和裝配任務。換句話說，它表示在其相關流程中一套夾具是否能夠滿足公差要求。 2.3夾具理論比較 為了用于多種生產裝置和組裝應用，在不同的公司也有大量不同形狀和設計的夾具。這些夾具中的某一些的形式都是標準形式，然而另一些是經過專門設計和制造的特殊零部件。后者可以說是建立在產品的復雜性和大規模的基礎上的，所以可能會是非常昂貴的[9]。 無論成本和目的如何，制造和組裝過程都可以完成，要么不使用夾具，要么用固定幀夾具或用可重構或柔性夾具。表2對它們的典型應用的這些方法做出了比較。 固定框夾具通常用于重型應用上，它們更適合于應用在能夠減輕花費開銷的大量產品上。 對于制造業和大型組裝及復雜產品來說，柔性夾具的應用有很多好處。特別是在研究和發展工作中，以及低容量產品的情況下，制造柔性夾具和夾具可能會是非常有益的。除了在時間和金錢上使利益均衡外，柔性夾具還會有一個更加靈活的設計思路。由于在夾具的制造和裝配過程中，會直接和經常改變夾具的拓?fù)涑杀?。與傳統夾具相比較，這種類型的柔性夾具的可重用性和可重構性是一個主要的優點。這一點尤為重要，因?yàn)樗诰G色制造方面符合行業的發展方向，通過回收使用系統的組成部件，為相關項目的工裝費用降低了項目成本。 表2.1 用于驗證夾具大量的例子、便攜式測量儀器 儀器 輔助部件 測量類型 接觸式 非接觸式 圖像 激光跟蹤儀 賽立信探頭 是 T型探頭 是 激光雷達 球形目標 是 攝影 目標 是 光投影 是 關節臂 三坐標測量機 基于激光掃描頭 是 接觸探頭 是 2.4 柔性夾具的安裝 本節中描述的夾具在安裝過程中需要考慮一些問題。夾具元件安裝在合適位置可以說是一種挑戰，尤其是當定位公差比較小時，柔性夾具也應當被監測以便于開發和與傳統夾具相比較它們的剛性。 給出了一個通用的描述階段根據初步夾具安裝在仿真軟件環境和利用一些尺寸為5m×4m×3m的大尺寸夾具的實際實驗結果來測量指令階段。這是不論這個夾具是否是第一次安裝在夾具中還是對已經存在的夾具只做外形上的更換，其都是為了定位不同的零部件。 根據其復雜性，一種典型的大尺寸夾具具有三至五個結構。通常除了有一個主框架之外，在每一個級別的基本水平，也可以由一個或多個結構。這些結構用來作為參考以便于作為夾具基準來定位。在一個自動化固定的平臺上，機器系統會進行多項任務，比如定位、加工和進行裝配。因此機器人的工作基準與夾具的工作框架相聯系。仔細考慮夾具的綜合數據，會確保后續安裝達到預期的公差要求。 2.4.1 測試輔助柔性夾具的安裝 柔性夾具的安裝在第一次進行模擬仿真時有幾個安裝階段。使用模擬演習，在這個工程中可以減少一些潛在的錯誤和返工。測量輔助安裝過程是類似的跟蹤對象位置的過程，是常見的大尺寸組件用到的。夾具的組件先用這種方法使其大致位置公差在1mm以內，然后當所有的夾具組件被放到所設計的位置時，在0.1mm至0.15mm公差內，它們可以使用適當?shù)呐ぞ厥站o。典型的計量協助柔性夾具安裝階段如下： 在出廠時設置初試參考結構； 測量初始參照系； 安裝基地或其位置的主框架； 安裝脫機內結構； 安裝控股和定位； 在內框和主框架位置安裝鉗、套管和皮卡。 底座上安裝內框； 重點定位元件的精細調整和緊固； 核查參照系和夾具； 對于夾具關鍵位置的服務監測。 這些階段是從無到有夾具的完整安裝。更不用說，在設計變化略有變化的情況下，一些下面的操作將被忽略。 表2.2 不同夾具理念之間簡明的比較 典型特征 固定框架 柔性夾具 夾具 應用 大批量產品 小批量產品 樣機 優點 唯一性 可重復性 可重構性 成本效益 耐用性 非常高 高 低 剛度 非常高 剛性不確定 低 缺點 重量 重 中 低 可移植性 不可移植 難以在每一個安裝中定位 難以進行 成本 非常高 中等 低 生產時間 長 中等 短 2.4.2 柔性夾具的安裝 柔性夾具安裝過程中采取了以下階段： 安裝夾具的主框架； 移動單元和子系統組裝； 夾具內框架在夾具裝配中的安裝； 皮卡和夾具的裝配。 主框架通常是夾具的骨干。因此，它一般不會改變外形，和內框架及較小的元素如襯套、皮卡和夾具一樣具有規律性。慎重考慮制造過程可以減少夾具元件較大元素的重新排列，也會更進一步節約時間和成本。圖3顯示了三組不同活動小組對于柔性夾具的安裝過程。在這個過程中，假定夾具的標準件是從可供選擇的現成的部件和組件中選出來的，然后提前在大量的物理安裝測試和調試時以降低測量不確定度來進行一次夾具安裝。一旦達到可接受水平的不確定性的物理安裝才能進行。 圖2.3 柔性夾具的測量輔助安裝程序 在夾具安裝過程中，它可能需要用到多個測量系統或用到包括一套完整夾具安裝關鍵點的測量系統。這應該包括在夾具維修期間放在工廠的地板和墻壁上的穩定性及漂移檢查的目標參考點。 在夾具上定位的關鍵點、測量儀器的不確定性應該予以考慮。作為一個經驗法則，每個夾具關鍵位置的定位的準確性應該是在10倍，甚至比所需的耐受性更好。換句話說，如果組件公差指定至0.1mm，則夾具定位精度至少應為0.01mm。 柔性夾具安裝的最佳做法如下： 一個工廠的墻壁和地板上的初始參考點的位置是首選，以減少測量的不確定性； 應驗證該儀器所在位置上經常使用初始參考點的基地； 在每個夾具的大節上，為更好地具有跟蹤和可重復性，可以附加多個球式反射跟蹤系統； 夾具大型組件有關于彎曲或扭曲的測量應集中在角梁的中央部分，以減少定位誤差； 內框架參考點應選擇盡可能遠的創建框的坐標系統。這可能會導致在內框坐標系時的較小的不確定性。 3.不確定性 由于評估的結果旨在對于所描述物體真正價值范圍內的評估定位，則不確定性被定義為膠[8]。這里的不確定性來自兩方面的審查，首先是與測量過程中有關的，其次是與夾具定位的不確定性有關。測量不確定性的一些因素，如灰塵、重力、溫度、氣壓、濕度、測量儀器和相關軟件中的系統誤差、操作人員的技能、接觸探針或球式反射跟蹤儀。基于膠[8]的定義，測量結果應伴隨著它的不確定性說明，這些錯誤詳細來源的討論超出了本文的范圍。已經有多項研究來建立真正的不確定性的一些測量儀器[10、11]。 夾具關鍵點的測量結果應該包括相關的置信水平。除了最初的不確定性上升的測量儀器，夾具的不確定性還有其他方面的影響。夾具框架方面的應用由于產品重量以及制造工藝過程在夾具框架中能創建一些彈性變形。夾具有了集成化、自動化和移動部分，是這個問題變得更加復雜。 仔細考慮夾具設計階段不確定性的來源可以在一個給定的情況下減少過度使用公差預算的風險。夾具的精度和夾具的成本之間有著直接的關系。然而，整體的成本也應該被考慮在內。高數額的零部件有更長的使用壽命。換句話說，質量特征接近平均值是，在使用過程中會很少失效。朝六個方向靠近在安裝時是很必要的，然后是在高精度夾具和敏感部位上的可重構、柔性夾具及夾具的監測。 4.討論 柔性夾具適用于組裝和在加工部分有不同的設計和幾何參數。尤其是當這些部件之間的設計變化小時，這種類型的夾具被證明是具有成本效益和快速的解決方案，這是因?yàn)樗赡軙ㄟ^夾具重新配置到一個新的產品或組件的變種上。然而，當所需的零件盒裝配的設計完全不同時，可能需要不同尺寸夾具組件的完整地重排，因此，在設計一個新的零件和重組夾具的拓?fù)浣Y(jié)構時應該考慮到要便于減少夾具的安裝和重新配置的時間以及成本，并最大限度的重用現在的組件在當前的裝配中。 一個柔性夾具有許多種裝配方式，是由于其靈活性。在正確的安裝順序下選擇合適的組件，可以最大限度的節約成本和時間。本次選擇的過程中應該對未來產品的夾具的潛在的重用予以考慮。在產品不斷變化的情況下，計劃和設計夾具框架是很重要的。使用定制的夾具、緊固件、軸套和其他夾具元件都是降低成本的關鍵問題。 仿真軟件和工具的廣泛使用，可以減少返工和浪費夾具材料相關的成本。例如測量儀器，其目標點之間的視線檢查就會使用這些軟件來輔助。圖4顯示了柔性夾具安裝在測量仿真軟件中的第一個階段。由于夾具正在興建的模擬的效益越 來越明顯，因此它可以突出儀器與目標測量點的水平視線的問題和不確定性。 由于關于夾具操作中重量和力使夾具元件的電位漂移和變形，則可以提前在仿真中分析以及在購買夾具元件方面的財政。更重要的是，這種工具允許更好的裝配和制造等操作，因?yàn)樗鼈兡芴崆胺治龀鰥A具的長處和弱點，揭示其物理設置。 選擇合適的測量儀器最重要的是要協助夾具安裝的的計量。一個連貫的計量系統，其測量結果的不確定性能夠決定夾具的不確定性，也暴露了夾具和是否符合一個給定的公差范圍內所需任務的能力。 圖4.1 測量輔助夾具安裝的模擬過程 由于關于夾具操作中重量和力使夾具元件的電位漂移和變形，則可以提前在仿真中分析以及在購買夾具元件方面的財政。更重要的是，這種工具允許更好的裝配和制造等操作，因?yàn)樗鼈兡芴崆胺治龀鰥A具的長處和弱點，揭示其物理設置。 選擇合適的測量儀器最重要的是要協助夾具安裝的的計量。一個連貫的計量系統，其測量結果的不確定性能夠決定夾具的不確定性，也暴露了夾具和是否符合一個給定的公差范圍內所需任務的能力。 總結 零件和裝配體應該以盡量減少夾具成本的方式來設計，以滿足使用標準組件。如果在夾具更新至下一產品時提前思考，則其速度和成本可能會增加。在夾具和固定裝置的設計上有強大的總成本、碳足跡及其可持續性。它往往要求生產出只有極少數的典型設計或產品，子系統或組件，以滿足產品的變化和客戶的需求。對于大型產品的幾何尺寸超出幾米夾具的可能會造成重大的開銷。此外，一旦所需的零部件倍制造出來，這些夾具則會變得多余。常規回收多余夾具是不經濟的。因此，找到增加夾具的靈活性才是所需求的方法。 柔性夾具和夾具的概念已存于二十余年。然而它們的潛能還沒有真正發揮，是由于其精度可可重復性的不確定性。高精度計量系統現在能夠用來對夾具進行初始安裝和服務。然后使用該系統有可能重新設定夾具元素使其精確到一個新的拓?fù)浣Y(jié)構，以便于定位不同幾何位置的組件，允許幾次使用夾具。 本文提出了一種對于大規模柔性夾具及夾具初始定位和安裝的通用的算法。計量輔助夾具安裝的新概念被證明對復雜的設置和夾具的安裝是有益的。當完全裝配好時，夾具的穩定性可以通過慎重考慮和選擇夾具幾何位置上的關鍵點來予以保證。這種方法將應用于大尺寸元件和產品的制造以及裝配件，尤其是應用于航空航天和發電工業中。 G. Seliger et al. (eds.), Advances in Sustainable Manufacturing: Proceedings of the 8th Global Conference 149 on Sustainable Manufacturing, DOI 10.1007/978-3-642-20183-7_22, Springer-Verlag Berlin Heidelberg 2011 Methodology for High Accuracy Installation of Sustainable Jigs and Fixtures J. Jamshidi, P.G. Maropoulos Department of Mechanical Engineering, University of Bath, UK Abstract The ability to accurately measure the components of jigs and fixtures during their installation determines the state of their precision, especially for large size products and applications. This matter is crucial in mass customisation where small batches of products and components with high variety in design are manufactured. Product quality should be in harmony with rapid changeover philosophy as compromising quality for speed is not forgivable for sensitive components and assemblies such as those seen in the aerospace industry. It is necessary for the installation of the jigs and fixtures to be highly accurate in order to minimise the use of tolerance budget due to variations in jigs and fixture positioning. Major overhead costs for jigs and fixtures particularly in the aerospace industry led to the development of the concept of flexible and reconfigurable jigs and fixtures. Reusability of reconfigurable jigs and fixtures makes them attractive for sustainable solutions as their components can be reused for several variant of a product or assembly. The main drawbacks of this type of jigs and fixtures have been their poor accuracy and reliability. In this paper accurate positioning of the key components of sustainable jigs and fixtures is investigated. The factors affecting the performance of the jigs and fixtures are reviewed from the installation stage. The paper introduces a methodology for minimising uncertainties in positioning of the holds and clamps for flexible jigs and fixtures. Keywords: Sustainable Jig, Jig installation, Calibration Uncertainty, Jig Monitoring, Metrology, Reusable Jig 1 INTRODUCTION Factors such as quality and reliability have long converted to implicit characteristics of the new products. Recent market trends have forced manufacturing industries to move towards mass customisation in their products and service range. Increased variation in the design of new products is followed by a second wave of variation with higher amplitude at subassemblies and component level. State of the art manufacturing systems and technologies have provided more flexibility, enabling designers to think more freely. For instance new large volume measurement systems, developed in the past few years, are capable of measuring several decametre distances. Such technologies facilitate the verification of large size components that used to be manufactured from several assembled components. The manufacturing of large size products requires specialist jigs and fixtures in order for their components to be held in the desired orientation during build and assembly. This requires major overhead cost that can only be justified by mass production in some cases or otherwise the cost of finished products can be very high. This issue contradicts with the market trends where customers are constantly looking for higher value for their money. In a typical product the variation in the product creates a more sustainable business as it can fulfil the needs of a relatively larger market. Flexible and reconfigurable jigs and fixture that can be formed in different shapes to support different variation of products is a key solution for the above challenges. The concept of flexible jig existed for several years in the research domain 1. However, they are not fully utilised to a great extent in real production facilities especially for large size product manufacturers, such as aerospace. This is due to the challenges related to their initial installation, poor calibration, and repeatability that often exceed the tolerance requirement. The manufacturing of these jigs and fixtures from high quality key components as well as their integration with large volume metrology systems can reduce the above limitations. This paper covers metrology issues related to the installation and calibration of flexible jigs and fixtures as well as their monitoring during service. 2 RELATED WORK 2.1 Manufacturing and assembly of large scale parts Typically prior to precision manufacturing of mechanical parts it is essential to move the raw material to the machine bench, proceed with rough cutting then fine alignment and clamping. At this stage the part is ready for machining of its high precision key features. However, this is not always possible for large size and/or heavy components. Large scale products refer to those with components that are not economically possible to handle or move around in the factory for fabrication and assembly purposes 2. The manufacturing and assembly processes of these parts encompass movement of the machines and systems to the desired location and orientation with respect to these parts. Such parts are normally held in their positions using large size jigs and fixtures. If these parts are produced in small batch sizes that is the case for aerospace industries, high overhead cost per product will occur. There have been many attempts to design and manufacture jigs and fixtures so that they can hold a number of variants of components 3, 4. However, this approach is not feasible for parts with sensitive or key features due to their high accuracy requirements. J. Jamshidi, P.G. Maropoulos 150 Adjustable, reconfigurable jigs and fixtures produce lower repeatability over time compared to fixed ones. Fixed jigs have permanent topology achieved through their permanent joints that are welded or riveted. Mechanical failure of these jigs and fixtures for example due to fatigue and plastic deformation is a main cause of terminating their service and sending them for recycling. With small batch manufacturing requirements it is now common to retire a conforming jig as their service life depends on the life of products. In other words soon after the cease of manufacturing a parts variant, the associated jigs and fixtures become redundant. Even if the jigs are still in working order, they have to be scrapped and sent for recycling. This method brings the burden of high energy consumption for recycling. Even for the fixed jigs and fixtures the drift in the large size parts and jig can affect the accuracy of a large size assembly 5. Several methods for analysing jig rigidity have been developed 6 to evaluate the impact of vibration on large size jigs. In any case a more sustainable manufacturing can only be achieved by alternative solutions. Figure 1: Typical components of large scale jig (image courtesy of Electroimpact http:/ Extensive lead time to manufacture is another major drawback for fixed jigs and fixtures. These jigs should be ordered well in advance of any manufacturing processes. This can create additional complexity in production planning and product time to market. Regardless of their type, large scale jigs have a number of common elements including one main frame, one or a number of inner frames, potentially one or a number of moving mechanisms, and smaller components such as clamps, bushings, pickups and adjustable screws (Figure 1). 2.2 Flexible jigs and fixtures The concept of flexible jigs and fixtures is developed for increased sustainability, rapid changeover as well as low cost. It is now possible to use off the shelf modules and clamps for jigs and fixtures design and assembly. Depending on the requirement only a handful of specialised components for the jigs and fixtures might be needed to be custom designed and manufactured. In this concept the majority of bulk components, joints at the attachments are used in for a specific application. Once the product design variant is fully manufactured it is then possible to disassemble the above components and reassemble them in a new topology to suite the next design variant. This cycle can be repeated over a large number of times resulting in reduced overhead cost for jigs and fixtures. Needless to mention the other factors such as disassembly time, resetting time, operators time should be considered for evaluating the real cost benefit of using this type of jigs and fixtures. This approach best reduces the cost of jigs and fixtures for the assembly and component ranges that are fairly close in design. Depending on the level of variations in the components and the type of work required on each a different percentage of the flexible jigs need to be rearranged. This matter is crucial to be considered at design stage in order to increase the benefit of using this type of jigs and fixtures. For example, when possible, the location and 3D positioning of pickups and clamps on different variants of the component or even totally different parts should be in close proximity to increase compatibility and inter-changeability of sub-systems of jigs and fixtures. Having a collection of the key components of the jigs can guarantee the availability of the desired jigs in a short time. In addition to this the storage of the jigs required less space as it is possible to dismantle all the modules that are typically in the form of scaffolding and place them next to each other. Flexible jigs are currently utilised in some of the automotive companies (Figure 2) as their accuracy level is sufficient for this sector. Despite the above benefits there are Clamp Main frame Inner frame Component Adjustable holds Moving mechanisms Methodology for High Accuracy Installation of Sustainable Jigs and Fixtures 151not many flexible jigs in operation in large size manufacturing facilities such as aerospace factories. Accuracy and uncertainty of positioning pins, repeatability of the clamps and drift of the jig structure are all contributing to the fact that these jigs cannot meet the tolerance requirements of the power generation and aerospace industries. These jigs have high potentials for utilisation in the above industries once their accuracy problems are resolved. Figure 2: Fixture with reconfigurable components for automotive industry (image courtesy of Witte http:/www.horst-witte.de/en/) There has been a number of new developments in large volume metrology systems and technologies. Modern laser based metrology systems and technologies are now capable of measuring large size products up to several decametres with acceptable accuracy. These systems can be used to accurately position mountings of the key components of the jig during its installation and initial setup. The installation of jigs and fixtures typically starts form its base or main frame then large components and gradually to the smaller components such as pickups and clamps. Metrology systems can be used for the installation of flexible jig main frame and its inner frames to guarantee the correct positioning of each and every component. Table 1 shows a few of these large scale measurement systems. For technological review of these systems see 7. Laser tracker systems capable of measuring reference points, are among the most suitable measurement systems for this purpose. The instrument tracks a Spherically Mounted Retroreflector (SMR) target the position of which can be registered in three dimensional space. SMR can be contacted directly with the target object to provide geometrical positional information or can be used within a mechanically repeatable SMR nest known as Laser tracker target or in short target from this point on. Laser trackers like any other measurement instrument have a level of uncertainty that need to be accounted for during the jig installation process. Also the line of sight issues between the laser tracker and its target point should be considered and if necessary multiple tracker positions should be used. In real measurement activity the result must be accompanied with a statement of uncertainty. Such statement characterises the dispersion of the values that are reasonably attributed to the measurand 8. This issue is the same for the installation and later verification of any jig or fixture. This knowledge clarifies the jig capability of a given positioning and assembly task. In other word it indicates if a jig can meet the tolerance requirements for its related processes. 2.3 Comparison of jig philosophies There are a large number of different shape and design jigs and fixtures in different companies for various manufacturing and assembly applications. Some of these jigs and fixtures are readily available in standard forms, while some are designed and manufactured specific to particular parts and tasks. The latter can be very expensive based on the complexity and scale of the products 9. Regardless of cost and purpose a manufacturing or assembly process can be performed using with no jig, with fixed frame jigs, or with reconfigurable or flexible jigs. Table 2 provides a comparison of these methods with their typical applications. Fixed frame jigs are typically for heavy duty applications. They are more suitable for applications with a large number of products that can relax the overhead cost of the jig. There are several advantages in the application of flexible jigs and fixtures for the manufacturing and assembly of large and complex products. In particular for research and development work, as well as for cases where low volume products are manufactured flexible jig and fixture can be very beneficial. In addition to time and money saving benefits the possibility of having a flexible jig gives more freedom to the design, manufacturing and assembly processes due to the low direct and recurrent cost of changing the overall topology of the jig. Reconfigurability and reusability of flexible jig is a main Clamp Main frame Inner frame Component J. Jamshidi, P.G. Maropoulos 152 advantage for this type of jig compared to conventional jigs. This is particularly important as it is in line with the industry direction in terms of green manufacturing by recycling components from a used system, reducing project costs with regards to expenses for tooling of associated items. Table 1: Examples of large volume/portable measurement instruments for jig verification Measurement type Instrument Auxiliary components Contact Non-contact Image SMR probe ? Laser Tracker T-probe ? Laser Radar Spherical targets ? Targets ? Photogrammetry Light projection ? Laser based scanning head ? Articulated Arm CMM Contact probe ? 3 FLEXIBLE JIG INSTALLATION The issues and concerns that need to be considered in the jig installation procedure are described in this section. The installation of the jig components in the right position can be a challenging especially when the positioning tolerances are tights. Flexible jigs should also be monitored in order to exploit and compare their rigidity with that of the conventional ones. Stage by stage measurement instruction for the jig installation based on the results of an initial jig setup in the simulation software environment and practical experiment of a large size jig with dimensions of 5m x 4m x3m is given in a generic description. This is regardless of whether the jig is in first time installation or it is a change of an existing jig topology into a new shape, for holding a different component. Depending on the complexity a typical large size jig has between three to five levels of frames. Apart from the base level with normally one main frame, at each level there can be one or several frames. These frames are interrelated with reference to the jig datum in order to facilitate the positioning and functionality required. In an automated, fixed platform, robotic systems carry out several tasks such as part positioning, machining and assembly. The robot working datum therefore is linked with the working frame of the jig. Careful consideration of jig datuming strategy and its subsequent installation can secure achieving the desired tolerance. 3.1 Measurement assisted flexible jig installation There are several stages for the installation of flexible jigs that can be carried out in first simulation and then real world. The use of simulation exercise can reduce the number of potential errors and rework during this process. The process of measurement assisted installation is similar to tracking objects to position that is common for large size assemblies. In this approach the components of the jig are roughly positioned, within 1mm tolerance from the target position, at first. Then when all of the jig components are attached into their designated positions, within 0.1mm to 0.15mm tolerance, they are tightened using the appropriate torque. The typical stages of metrology assisted flexible jig installation are given below: 1. setting initial reference frames in the factory 2. measurement of initial reference frame 3. installation of base or main frame in its position 4. installation of inner frames offline 5. installation of holding and positioning brackets 6. installation of clamps, bushings and pickups in their rough position on inner frames and main frame 7. installation of inner frame on the base frame 8. fine adjustment and fastening of key locating components 9. verification of reference frames and clamps 10. in service monitoring of key positions on the jig These stages are related to the complete installation of the jig from the scratch. Needless to mention that in case of slight Methodology for High Accuracy Installation of Sustainable Jigs and Fixtures 153change in design variation some of the following operations will be omitted. Table 2: A brief comparison between different jig philosophies Typical characteristic Fixed frame Flexible jig Jig-less Application Large volume production Low volume production Prototyping Uniqueness Repeatable Reconfigurable Cost effectiveness Durability Very high High Low Pros Rigidity Very high Uncertainty rigidity Low Weight Heavy Medium Low Portability Non-portable Difficult component positioning in each setup Difficult to program Cost Very high Medium Low Cons Manufacturing time Long Medium Short 3.2 Algorithm for flexible jig installation The installation processes for flexible jigs take the following main stages: 1. the installation of main frame of the jig 2. the assembly of moving units and sub-systems 3. the installation of the jig inner frames on the jig assembly 4. the assembly of pickups and clamps on the jig. The main frame is the backbone of the jig that is typically fixed for a large number of jig topology and design variations. Therefore it does not change in shape as regularly as the inner frame or the smaller elements of the jig such as bushings, pickups and clamps. Careful consideration of the manufacturing process can reduce the necessity of rearranging larger elements of the jig components resulting in further time and money saving. Figure 3 in three separate groups of activities shows the processes of flexible jig installation. In this process it is assumed that the standard parts of the jig are selected from the available, off the shelf sections and components. Then in advance of the physical installation a number of tests and trials are carried out to plan the jig installation in such a way that the uncertainty of measurement is reduced. Once the acceptable level of uncertainty is achieved the physical installation can take place. Figure 3: Measurement assisted installation procedure for flexible jig J. Jamshidi, P.G. Maropoulos 154 In jig installation process it might be required to use multiple measurement system or a measurement system from several locations to cover the complete set of key points for jig installation. This should include the auxiliary target reference points that are placed on the factory floor and wall for stability and drift check during the jig service. During the localisation of the key points on the jig the uncertainty of the measurement instrument shoul