玻璃清潔機器人設計 3
摘 要
玻璃清潔機器人是一個實用性很強的裝置。自從本世紀六十年代以來，爬壁機器人及其相關技術受到人們的廣泛關注，但是，大都是進行了一些試驗性質的研究，其相關的理論分析尚不成熟。作為清洗用的爬壁機器人來說，其清洗工作具有簡單、重復的特點，比較適合機器人自主工作，玻璃清潔機器人是以清洗高層建筑為目的的壁面移動機器人，它的出現將極大降低高層建筑的清洗成本，改善工人的勞動環境，提高生產率，也必將極大地推動清洗業的發展，帶來相當?shù)纳鐣б婧徒?jīng)濟效益。因此，玻璃清潔機器人有著良好的應用前景。
本文首先對玻璃清潔機器人這個課題的來源、目的及意義進行了闡述，簡單介紹了國內外玻璃清潔機器人的發展情況，對玻璃清潔機器人的幾種不同的移動方式及吸附方式進行了比較，最后采用了多吸盤的框架式結構，具有結構簡單、操作方便等優點。接著對玻璃清潔機器人的總體方案進行了設計，設計了行走機構以及轉向機構，通過平動氣缸與腿部氣缸來實現機器人的移動，并且通過對壁面吸附可靠性的分析選擇了吸盤、吸盤支座及快擰接頭等部件，還對其它的氣動元件進行了選型，并且繪制了氣壓系統圖。最后對玻璃清潔機器人的控制系統進行了設計，采用了三菱的FX系列可編程控制器進行控制，并對可編程控制器的結構特點及工作原理進行了簡單的介紹，然后分析了本設計中玻璃清潔機器人的工作過程，對可編程控制器的輸入輸出端口進行了分配，并且編寫了程序的梯形圖。
關鍵詞：玻璃清潔機器人; 多吸盤的框架式結構; 行走機構; 轉向機構; 壁面吸附可靠性
ABSTRACT
Wall-cleaning robot is a very practical device.Since the sixties of this century,the climbing robot and related technology have greatly provoked word wide attention.But most of them are carried out some pilot studies,the relevant theoretical analysis is not yet mature.Used as a cleaning climbing robot,its cleaning is simple and repetitive,and to compare autonomous robots for work.Wall-cleaning robot is cleaning high-rise building wall for the purpose of mobile robot,its appearance would be extremely reduce the cost of cleaning high-rise buildings,improve the working environment of workers and increase productivity.It will also greatly promote the cleaning industry, bringing considerable social and economic benefits.Therefore,the wall-cleaning robot has a good prospect.
This article first wall-cleaning robot from the subject,purpose and meaning is described,briefly introduced the development of domestic and international situation wall-cleaning robot for wall-cleaning robot moving in several different ways and adsorption compared.Finally,using the framework of multi-suction-type structure,with simple and convenient operation.Then on the wall-cleaning robot has been designed overall program designed to walk institutions and steering mechanism,through the translation cylinder and cylinder to achieve the robot’s legs move,and by adsorption on the wall of the reliability of selected sucker,sucker bearing and quick screw joints and other components,also carried out other pneumatic components selection,and rendering the air pressure system diagram.Finally,wall-cleaning robot control system design,using a Mitsubishi FX series programmable controller to control,and the structural features of PLC and working principle of a simple introduction,and then analyzes the design the working process of wall-cleaning robot,the programmable controller input and output ports of the distribution,and has prepared a program of the ladder.
Key words:wall-cleaning robot; framework of multi-suction-type structure; walk institutions; steering mechanism; adsorption on the wall of the reliability
目 錄
1緒論 1
1.1爬壁機器人 1
1.2課題的來源、目的與意義 2
1.3國內外玻璃清潔機器人的研究現狀 2
1.4課題主要內容及技術參數 12
1.5本章小結 13
2玻璃清潔機器人設計 14
2.1玻璃清潔機器人的組成 14
2.2行走機構的設計 15
2.3轉向機構的設計 23
2.4吸附裝置的選取 27
2.5玻璃清潔機器人的框架以及吸盤安裝板的設計 31
2.6控制閥及其它氣動元件的選取 34
2.7氣路的設計 37
2.8本章小結 38
3結論 39
參考文獻 40
致謝 41